|
Buying a generator
I need to buy a small generator so i can run one power tool at a time
to rebuild my cabin in Wyoming. This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? Or, should I buy Chinese and gamble that it will work long enough to be useful.? |
Buying a generator
In article ,
says... In article 61739c51-20c6-4c1b-8231-f1745e9eaf9d@ 22g2000prx.googlegroups.com, says... I need to buy a small generator so i can run one power tool at a time to rebuild my cabin in Wyoming. This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? Or, should I buy Chinese and gamble that it will work long enough to be useful.? http://www.sears.com/shc/s/p_10153_1...No=22&blockNo= 97&blockType=G97 No good... These things are huge heavy, and huge loud. The one above is a contractors generator and will probably not have a spark arrestor either so it is dangerous around the woods and such. Like I said, get the Honda, it's light, quiet, dependable... -- Team Rowdy Mouse, Banned from the Mall for life! |
Buying a generator
On Jun 13, 11:42*am, I_am_Tosk
wrote: In article , says... In article 61739c51-20c6-4c1b-8231-f1745e9eaf9d@ 22g2000prx.googlegroups.com, says... I need to buy a small generator so i can run one power tool at a time to rebuild my cabin in Wyoming. *This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. *The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? *Or, should I buy Chinese and gamble that it will work long enough to be useful.? http://www.sears.com/shc/s/p_10153_1...No=22&blockNo= 97&blockType=G97 No good... These things are huge heavy, and huge loud. The one above is a contractors generator and will probably not have a spark arrestor either so it is dangerous around the woods and such. Like I said, get the Honda, it's light, quiet, dependable... -- Team Rowdy Mouse, Banned from the Mall for life! The 1000 watt Honda is $859 and the 2000 watt is $999 from Northern Tool. |
Buying a generator
On Jun 13, 12:11*pm, Frogwatch wrote:
On Jun 13, 11:42*am, I_am_Tosk wrote: In article , says... In article 61739c51-20c6-4c1b-8231-f1745e9eaf9d@ 22g2000prx.googlegroups.com, says... I need to buy a small generator so i can run one power tool at a time to rebuild my cabin in Wyoming. *This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. *The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? *Or, should I buy Chinese and gamble that it will work long enough to be useful.? http://www.sears.com/shc/s/p_10153_1...No=22&blockNo= 97&blockType=G97 No good... These things are huge heavy, and huge loud. The one above is a contractors generator and will probably not have a spark arrestor either so it is dangerous around the woods and such. Like I said, get the Honda, it's light, quiet, dependable... -- Team Rowdy Mouse, Banned from the Mall for life! The 1000 watt Honda is $859 and the 2000 watt is $999 from Northern Tool. If I buy the Honda, it will have to be in the category of "Things my wife does not know how much I spent". |
Buying a generator
On 13/06/2011 9:18 AM, Frogwatch wrote:
I need to buy a small generator so i can run one power tool at a time to rebuild my cabin in Wyoming. This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? Or, should I buy Chinese and gamble that it will work long enough to be useful.? I would buy the one that I thought might last the longest. Where it came from isn't really a big deal, as like HP printers, American name, foreign guts. More American content in many Toyota compared to many GM... Do what is best for YOU!!! That is what the unions and corrupt management do. As for Chinese, I have had both good and bad. Bought NA brand name weed eater for $175, it broke, just to find out the engine was Chinese. So I bought Korean for $50 on a clearance and it will not die. -- Government isn't the solution to the bad economy, it is the problem. |
Buying a generator
On 6/13/11 11:18 AM, Frogwatch wrote:
I need to buy a small generator so i can run one power tool at a time to rebuild my cabin in Wyoming. This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? Or, should I buy Chinese and gamble that it will work long enough to be useful.? 1. You'll be surprised to find what what is and what is not "made in China." 2. There are plenty of top-quality goods made in China. My objection to Chinese goods is that they produced by workers under near slave labor conditions. 3. As cheap as you are, you should round up a couple of furry critters out there and put them on a generating treadmill. When they finish working for you, you can eat them. -- Want to discuss recreational boating and fishing in a forum where personal insults are not allowed? http://groups.google.com/group/rec-boating-fishing |
Buying a generator
On Jun 13, 1:30*pm, Canuck57 wrote:
On 13/06/2011 10:49 AM, Harryk wrote: On 6/13/11 11:18 AM, Frogwatch wrote: I need to buy a small generator so i can run one power tool at a time to rebuild my cabin in Wyoming. This means I need less than 2000 watts. The higher cost models include Honda at over $800, Yamaha at about the same and Honeywell at about $650 . The cheaper models are less than $200 but are made in China. I expect to rarely use this generator and it would never be needed for emergency purposes. The Honeywell at $650 is almost reasonable. The cheap Chinese ones........................? So, should I follow my own advice and not buy chinese because when chinese goods break it always costs more money than the diff in purchase price? Or, should I buy Chinese and gamble that it will work long enough to be useful.? 1. You'll be surprised to find what what is and what is not "made in China." 2. There are plenty of top-quality goods made in China. My objection to Chinese goods is that they produced by workers under near slave labor conditions. 3. As cheap as you are, you should round up a couple of furry critters out there and put them on a generating treadmill. When they finish working for you, you can eat them. Na, tell us what you really mean. *If US ere like China, you woul dhave to move your fat ass and go to work. -- Government isn't the solution to the bad economy, it is the problem. HK, the furry critters abandoned ship cuz I don't keep stuff for em to eat. |
Buying a generator
On Mon, 13 Jun 2011 09:21:11 -0700 (PDT), Frogwatch
wrote: The 1000 watt Honda is $859 and the 2000 watt is $999 from Northern Tool. If I buy the Honda, it will have to be in the category of "Things my wife does not know how much I spent". I agree with the Honda recommendation. They are light weight, quiet and reliable. Honda uses a different technology than other small generators - the engine runs at variable speeds depending on load requirements. The output is DC (direct current) which then gets inverted back to 60 cycle AC output. As a result, frequency and voltage regulation are also much better than most others. |
Buying a generator
On Jun 13, 4:19*pm, Wayne B wrote:
On Mon, 13 Jun 2011 09:21:11 -0700 (PDT), Frogwatch wrote: The 1000 watt Honda is $859 and the 2000 watt is $999 from Northern Tool. If I buy the Honda, it will have to be in the category of "Things my wife does not know how much I spent". I agree with the Honda recommendation. *They are light weight, quiet and reliable. * Honda uses a different technology than other small generators - the engine runs at variable speeds depending on load requirements. *The output is DC (direct current) which then gets inverted back to 60 cycle AC output. *As a result, frequency and voltage regulation are also much better than most others. I also like that suggestion. Frog could go with a 500w sine-wave inverter and hook it up to a 12v battery. My dad did this and did some pretty good work with a 3/4 hp Chraftsman grinder and little battery discharge. |
| All times are GMT +1. The time now is 01:20 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com