![]() |
For my next construction project...
jps wrote:
On Fri, 01 Oct 2010 21:29:51 -0400, wrote: jps wrote: On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. I don't like the look of trex and it's expensive. I built a deck using 2x4 sunwood (treated) 15 years ago and it's doing great. Powerwash and oil once a year. I've had to replace a couple of lengths over the years but very little rotting. It's 6 feet off the ground and, as you might imagine, wet a lot. 6" wide boards are customary for wood/composite decks. Maybe in your part of the country. I've lived all over the country. Find a 4" deck board on the Trex site and get back to me. |
For my next construction project...
*e#c wrote:
On Oct 1, 12:21 pm, Secular wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. -- Republicans are the Party of No: No Leaders / No Ideas / No Morals Is this to tie your Boat to??? If not, **** off. You are responding to Harry. He's on your very short list of friends here, Yellow Teeth. |
For my next construction project...
"LG" wrote in message ... *e#c wrote: On Oct 1, 12:21 pm, Secular wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. -- Republicans are the Party of No: No Leaders / No Ideas / No Morals Is this to tie your Boat to??? If not, **** off. You are responding to Harry. He's on your very short list of friends here, Yellow Teeth. "was on".... |
For my next construction project...
On Oct 2, 9:09*pm, LG wrote:
jps wrote: On Fri, 01 Oct 2010 21:29:51 -0400, *wrote: jps wrote: On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque * wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. I don't like the look of trex and it's expensive. *I built a deck using 2x4 sunwood (treated) 15 years ago and it's doing great. Powerwash and oil once a year. *I've had to replace a couple of lengths over the years but very little rotting. *It's 6 feet off the ground and, as you might imagine, wet a lot. 6" wide boards are customary for wood/composite decks. Maybe in your part of the country. I've lived all over the country. *Find a 4" deck board on the Trex site and get back to me. I always thought you were a " transient " , Krueger..... |
For my next construction project...
"*e#c" wrote in message ... On Oct 2, 9:09 pm, LG wrote: jps wrote: On Fri, 01 Oct 2010 21:29:51 -0400, wrote: jps wrote: On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. I don't like the look of trex and it's expensive. I built a deck using 2x4 sunwood (treated) 15 years ago and it's doing great. Powerwash and oil once a year. I've had to replace a couple of lengths over the years but very little rotting. It's 6 feet off the ground and, as you might imagine, wet a lot. 6" wide boards are customary for wood/composite decks. Maybe in your part of the country. I've lived all over the country. Find a 4" deck board on the Trex site and get back to me. I always thought you were a " transient " , Krueger..... Wonder if Margaret lets him sleep out in the warehouse. |
For my next construction project...
On Oct 3, 11:01*am, "YukonBound" wrote:
"*e#c" wrote in message ... On Oct 2, 9:09 pm, LG wrote: jps wrote: On Fri, 01 Oct 2010 21:29:51 -0400, *wrote: jps wrote: On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque * wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. I don't like the look of trex and it's expensive. *I built a deck using 2x4 sunwood (treated) 15 years ago and it's doing great. Powerwash and oil once a year. *I've had to replace a couple of lengths over the years but very little rotting. *It's 6 feet off the ground and, as you might imagine, wet a lot. 6" wide boards are customary for wood/composite decks. Maybe in your part of the country. I've lived all over the country. *Find a 4" deck board on the Trex site and get back to me. I always thought you were a " transient " , Krueger..... Wonder if Margaret lets him sleep out in the warehouse. By the look of the Website, they HAVE no warehouse. They " order in " all their materials...in 2 to TEN days....LMAO !!!!!!! |
For my next construction project...
YukonBound wrote:
"*e#c" wrote in message ... On Oct 2, 9:09 pm, LG wrote: jps wrote: On Fri, 01 Oct 2010 21:29:51 -0400, wrote: jps wrote: On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. I don't like the look of trex and it's expensive. I built a deck using 2x4 sunwood (treated) 15 years ago and it's doing great. Powerwash and oil once a year. I've had to replace a couple of lengths over the years but very little rotting. It's 6 feet off the ground and, as you might imagine, wet a lot. 6" wide boards are customary for wood/composite decks. Maybe in your part of the country. I've lived all over the country. Find a 4" deck board on the Trex site and get back to me. I always thought you were a " transient " , Krueger..... Wonder if Margaret lets him sleep out in the warehouse. Call her, pussy boy. Then report back! |
For my next construction project...
|
For my next construction project...
wrote:
On Mon, 04 Oct 2010 20:09:23 -0400, wrote: wrote: On Sat, 02 Oct 2010 21:09:44 -0400, wrote: jps wrote: On Fri, 01 Oct 2010 21:29:51 -0400, wrote: jps wrote: On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque wrote: I'm thinking of building a new deck, approximately 15' x 25', approximately 9' above grade. I have no concerns about structure; I know what to do about that. I'm considering using the newer "composite lumber" (Trex is one brand name) for decking, rails, balusters, stairs, et cetera...you know, the stuff that shows. I'm wondering how well it resists weathering, rot, checking, splitting, whether it needs any maintenance aside from a good washing, et cetera. The last time I built a deck, I used cedar over pressure treated supports. The cedar was fine, but it did require a coat of transparent stain every season. Experiences with "trex" or other similar products? Thanks. I don't like the look of trex and it's expensive. I built a deck using 2x4 sunwood (treated) 15 years ago and it's doing great. Powerwash and oil once a year. I've had to replace a couple of lengths over the years but very little rotting. It's 6 feet off the ground and, as you might imagine, wet a lot. 6" wide boards are customary for wood/composite decks. Maybe in your part of the country. I've lived all over the country. Find a 4" deck board on the Trex site and get back to me. Nominal 4" decking fell out of favor when the nominal thickness went from 2" (1.5")_ to 5/4ths (1"). You can't span as far. Trex only makes that worse. Our docks use 1.5" x 5.5" decking on 18" O/C stringers so a wheeled cart will not bow them. Do you mean 16" OC joists/stringers? 18" would involve a lot of cutting and waste. Why would that be? The stringers run the length of the dock and the decking goes perpendicular 36" wide We cut down 12' deck boards. I had that 15 X 25 deck in mind. 16" centers work best with 8', 12', and 16' boards. In your case it doesn't matter - they could be 13-1/2" OC and it would still work. |
All times are GMT +1. The time now is 12:30 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com