BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   For my next construction project... (https://www.boatbanter.com/general/118647-my-next-construction-project.html)

LG[_5_] October 2nd 10 01:37 AM

For my next construction project...
 
YukonBound wrote:


"Harry®" wrote in message
...

It's the product of choice if you aren't concerned by the lack of
appearance of real wood. *It wood look good* with your new French door.

The wood is for Donny to jump on. Snicker!
Harry
"The 'C' students run the world."



Say what??
"It wood look good"???

Say what?

jps October 2nd 10 02:14 AM

For my next construction project...
 
On Fri, 01 Oct 2010 16:01:45 -0400, Secular Humoresque
wrote:

On 10/1/10 3:57 PM, YukonBound wrote:


"Harry®" wrote in message
...

It's the product of choice if you aren't concerned by the lack of
appearance of real wood. *It wood look good* with your new French door.

The wood is for Donny to jump on. Snicker!
Harry
"The 'C' students run the world."



Say what??
"It wood look good"???



The ID Spoofing Harry's wife hasn't seen real wood for 20 years.


That's how long they've been together.

jps October 2nd 10 02:18 AM

For my next construction project...
 
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.


I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.

LG[_5_] October 2nd 10 02:29 AM

For my next construction project...
 
jps wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:


I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.

6" wide boards are customary for wood/composite decks.

*e#c October 2nd 10 03:01 AM

For my next construction project...
 
On Oct 1, 12:21*pm, Secular Humoresque wrote:
I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

--
Republicans are the Party of No:
No Leaders / No Ideas / No Morals


Is this to tie your Boat to??? If not, **** off.

*e#c October 2nd 10 04:10 AM

For my next construction project...
 
On Oct 1, 8:32*pm, LG wrote:
Secular Humoresque wrote:
On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
*wrote:


I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.


I have no concerns about structure; I know what to do about that.


I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.


The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.


Experiences with "trex" or other similar products?


Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.


I'll be using 2x12's on 12" centers for the joists. Deck will support
a 45 PSF live load. I'll be using Lowe's "Top Choice Structural
Treated" lumber for structure.


You clearly have no idea what you are talking about. *12" centers for a
15' span of 2X12's? *You may be a fat-ass but 2X10's 16" OC will carry
you and Don. *The 45PSF is bull****, too.


Our own " counter boy " Kreuger here would know. You all know him,
he's the one under a womans thumb. Too stupid to do any management,
just a grunt Counter Boy, in Pompano Florida.

He's also the "Head Toilet Stall Maintainer " as well. It's been his
only promotion in 5 years.

Kreuger and the Panty Liner Ingersoll would make a good team. Kreuger
would design the stairs, and build them. Ingersoll would test the
stairwells " in his famous fashion ".LMAO !!!!!!

jps October 2nd 10 09:09 AM

For my next construction project...
 
On Fri, 01 Oct 2010 21:29:51 -0400, LG wrote:

jps wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:


I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.

I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.

6" wide boards are customary for wood/composite decks.


Maybe in your part of the country.

YukonBound October 2nd 10 01:55 PM

For my next construction project...
 


"*e#c" wrote in message
...
On Oct 1, 8:32 pm, LG wrote:
Secular Humoresque wrote:
On 10/1/10 1:17 PM, wrote:
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:


I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.


I have no concerns about structure; I know what to do about that.


I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know,
the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a
good
washing, et cetera.


The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of
transparent
stain every season.


Experiences with "trex" or other similar products?


Thanks.
We have a couple of docks here decked with trex. They are doing fine.
Just watch your spans. It is not as rigid as wood. Use wood for the
structural parts. The supplier will have a span chart for the decking.


I'll be using 2x12's on 12" centers for the joists. Deck will support
a 45 PSF live load. I'll be using Lowe's "Top Choice Structural
Treated" lumber for structure.


You clearly have no idea what you are talking about. 12" centers for a
15' span of 2X12's? You may be a fat-ass but 2X10's 16" OC will carry
you and Don. The 45PSF is bull****, too.


Our own " counter boy " Kreuger here would know. You all know him,
he's the one under a womans thumb. Too stupid to do any management,
just a grunt Counter Boy, in Pompano Florida.

He's also the "Head Toilet Stall Maintainer " as well. It's been his
only promotion in 5 years.

Kreuger and the Panty Liner Ingersoll would make a good team. Kreuger
would design the stairs, and build them. Ingersoll would test the
stairwells " in his famous fashion ".LMAO !!!!!!


Good idea for a comedy act.
Ditzy Dan would shoddily design & build staircases with the tools he can
sneak out of Elite Contractor Supply and the Freak would then be thrown down
same.
The question would be... what would last longer, Ditzy's poorly constructed
staircase or The Freaks head.


Califbill October 2nd 10 07:00 PM

For my next construction project...
 


"jps" wrote in message
...
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.


I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.


Treated in those days was arsenic compounds, not really a good surface to
walk on. And oiling it every year, is extra work, and then when kids crawl
on it, they get all dirty and black from the dirt the oil attracted. I had
a redwood deck before the Trex and it caused any kid or grandkid to become
filthy.


Harry® October 2nd 10 07:12 PM

For my next construction project...
 
"Califbill" wrote in message m...


"jps" wrote in message
...
On Fri, 01 Oct 2010 12:21:07 -0400, Secular Humoresque
wrote:

I'm thinking of building a new deck, approximately 15' x 25',
approximately 9' above grade.

I have no concerns about structure; I know what to do about that.

I'm considering using the newer "composite lumber" (Trex is one brand
name) for decking, rails, balusters, stairs, et cetera...you know, the
stuff that shows. I'm wondering how well it resists weathering, rot,
checking, splitting, whether it needs any maintenance aside from a good
washing, et cetera.

The last time I built a deck, I used cedar over pressure treated
supports. The cedar was fine, but it did require a coat of transparent
stain every season.

Experiences with "trex" or other similar products?

Thanks.


I don't like the look of trex and it's expensive. I built a deck
using 2x4 sunwood (treated) 15 years ago and it's doing great.
Powerwash and oil once a year. I've had to replace a couple of
lengths over the years but very little rotting. It's 6 feet off the
ground and, as you might imagine, wet a lot.


Treated in those days was arsenic compounds, not really a good surface to
walk on. And oiling it every year, is extra work, and then when kids crawl
on it, they get all dirty and black from the dirt the oil attracted. I had
a redwood deck before the Trex and it caused any kid or grandkid to become
filthy.


Black and slimy is apparently the look he is going for.

--
Harry
"The 'C' students run the world."


All times are GMT +1. The time now is 12:28 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com