"Harry" wrote in message
...
In article ,
says...

"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a
while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling
a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on
the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push
lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Maybe they don't have such modern sophisticated and refined things up
there, little buddy. I sure am glad you're back, I was getting raked
over the coals by people that just don't believe the amazing things I
and my parents have done. Except you. You believe me, huh?


I believe you are a very unsuccessful spoofer.

In article ,
says...

On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
.. .
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.

And well you shouldn't! It would be a pain in the ass to balance "after
sharpening". I balance while sharpening...

Scotty

--
Rowdy Mouse Racing - We race for cheese!

"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
. ..
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a
while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling
a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on
the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.


I could just walk two blocks over and get a professional to sharpen my
blade, but they want $10.00 or so.

YukonBound wrote:


"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a
while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like
calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level
on the
top.

Because I don't do any mechanical work of any kind, even though
I've
taken mechanical engineering courses, I shouldn't know what that
is.
BUT, I watched my mechanic doing the maintenence on my push
lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides
can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.


I could just walk two blocks over and get a professional to sharpen my
blade, but they want $10.00 or so.
Damn. Serious cash, eh?

On Mon, 28 Jun 2010 18:21:16 -0400, W1TEF wrote:

On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
. ..
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.

One of those...

It's bad on the grass to cut it with a dull blade...gives it jagged
edges,frizzies so to speak. Hell, it takes only ten minutes to hit the blade
with a file, unless you've got one of those lawnmowers like what's his name with
three or four blades to cut your five acres.,
--
'Illegal Alien' is to 'Undocumented Worker' as
'Crack Dealer' is to 'Pharmacist'.

John H

In article ,
says...

On Mon, 28 Jun 2010 18:21:16 -0400, W1TEF wrote:

On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
. ..
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.

One of those...

It's bad on the grass to cut it with a dull blade...gives it jagged
edges,frizzies so to speak. Hell, it takes only ten minutes to hit the blade
with a file, unless you've got one of those lawnmowers like what's his name with
three or four blades to cut your five acres.,

Sounds like you should get a good pair of scissors and cut the blades
individually. I might cut my grass for the third time this season
tomorrow, or I may just go to the track with The Mouse again

--
Rowdy Mouse Racing - We race for cheese!

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!

On 6/28/10 4:18 PM, nom=de=plume wrote:

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!




I was going to ask one of his buds here to donate a tube of K-Y so
Herring could shove it up his butt with a bit less discomfort, but
flajim and larry refused to share.

nom=de=plume wrote:

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!


So you admit you are into weird anal activities? Now that's ****ed up!

"Larry" wrote in message
...
nom=de=plume wrote:

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!


So you admit you are into weird anal activities? Now that's ****ed up!

It was a suggestion for an anal-retentive like John and you.