On 28/06/2010 2:18 PM, nom=de=plume wrote:

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!

Leave it for you to know. A de-plumer butt plug.

--
We all work for government, they ceased working for us a long time ago.

"I am Tosk" wrote in message
...
Sounds like you should get a good pair of scissors and cut the blades
individually. I might cut my grass for the third time this season
tomorrow, or I may just go to the track with The Mouse again

--
Rowdy Mouse Racing - We race for cheese!


Yup . .why do today what you can put off till tomorrow.
That Terri must be a saint.

"Canuck57" wrote in message
...
On 28/06/2010 2:18 PM, nom=de=plume wrote:

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!

Leave it for you to know. A de-plumer butt plug.

--
We all work for government, they ceased working for us a long time ago.

Clearly, you're the expert butt plugger!

On 6/28/10 10:06 PM, I am Tosk wrote:


Sounds like you should get a good pair of scissors and cut the blades
individually. I might cut my grass for the third time this season
tomorrow, or I may just go to the track with The Mouse again


Must be a challenge to mow, what with all the trash in your yard.

In article ,
says...

"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Maybe they don't have such modern sophisticated and refined things up
there, little buddy. I sure am glad you're back, I was getting raked
over the coals by people that just don't believe the amazing things I
and my parents have done. Except you. You believe me, huh?

On Mon, 28 Jun 2010 22:06:52 -0400, I am Tosk
wrote:

In article ,
says...

On Mon, 28 Jun 2010 18:21:16 -0400, W1TEF wrote:

On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
. ..
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.

One of those...

It's bad on the grass to cut it with a dull blade...gives it jagged
edges,frizzies so to speak. Hell, it takes only ten minutes to hit the blade
with a file, unless you've got one of those lawnmowers like what's his name with
three or four blades to cut your five acres.,

Sounds like you should get a good pair of scissors and cut the blades
individually. I might cut my grass for the third time this season
tomorrow, or I may just go to the track with The Mouse again

I've thought about getting out there with a pair of scissors and cutting the
blades to points. That would be cool.

In your case, the track sounds good. Do it, and take some video. When you're
making the video, let us know what number she is.

Do not fail at this task, Tosk.
--
'Illegal Alien' is to 'Undocumented Worker' as
'Crack Dealer' is to 'Pharmacist'.

John H

On Mon, 28 Jun 2010 20:20:19 -0600, Canuck57 wrote:

On 28/06/2010 2:18 PM, nom=de=plume wrote:

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Something you shouldn't sit on so much!

Leave it for you to know. A de-plumer butt plug.

Leave it to the plum to have another use for the thing.
--
'Illegal Alien' is to 'Undocumented Worker' as
'Crack Dealer' is to 'Pharmacist'.

John H

"Harry" wrote in message
...
In article ,
says...

"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a
while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling
a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on
the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push
lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Maybe they don't have such modern sophisticated and refined things up
there, little buddy. I sure am glad you're back, I was getting raked
over the coals by people that just don't believe the amazing things I
and my parents have done. Except you. You believe me, huh?


I believe you are a very unsuccessful spoofer.

On 6/29/10 8:57 AM, YukonBound wrote:


"Harry" wrote in message
...
In article ,
says...

"W1TEF" wrote in message
...
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a
while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like
calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level
on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push
lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Maybe they don't have such modern sophisticated and refined things up
there, little buddy. I sure am glad you're back, I was getting raked
over the coals by people that just don't believe the amazing things I
and my parents have done. Except you. You believe me, huh?


I believe you are a very unsuccessful spoofer.

If it is loogy, he is unsuccessful at everything.

In article ,
says...

On Mon, 28 Jun 2010 22:06:52 -0400, I am Tosk
wrote:

In article ,
says...

On Mon, 28 Jun 2010 18:21:16 -0400, W1TEF wrote:

On Mon, 28 Jun 2010 19:09:42 -0300, "YukonBound"
wrote:



"W1TEF" wrote in message
. ..
On Mon, 28 Jun 2010 16:58:47 -0400, W1TEF
wrote:

On Mon, 28 Jun 2010 16:47:34 -0400, wrote:

On Mon, 28 Jun 2010 16:00:55 -0400, Harry
wrote:

In article ,
says...

"John H" wrote in message
...
Ran across this while muddling in the garage. Couldn't, for a while,
figure out
what the hell it was.

Can you?

http://i98.photobucket.com/albums/l2...g1/whatamI.jpg


--
Calling an Illegal Alien an "Undocumented Worker" is like calling a
Crack Dealer an "Unlicensed Pharmacist"

John H

Looks sort of like the old tire bubble balancer. But no level on the
top.

Because I don't do any mechanical work of any kind, even though I've
taken mechanical engineering courses, I shouldn't know what that is.
BUT, I watched my mechanic doing the maintenence on my push lawnmower.
That object is to balance the lawn mower blade after sharpening.

I am not sure which Harry this is but the answer is right.

I'm curious - how do you balance a blade after sharpening?

Well I'll be danged - never thought of balancing the blade after
sharpening.

http://www.amazon.com/MaxPower-33907.../dp/B000FJTVSI

Never mind. :)


I didn't know there was a do-dad for home handymen to use.
I always balance my blades on a screwdriver shaft. It the two sides can
point east & west, I've taken the right amount off each side.

Never really had blades sharpened to tell the truth. I put a new set
of blades on every Spring - they last all summer into the Fall and I
change them again.

I can see why you would have to balance the blade after sharpening,
I've just never had to do it.

One of those...

It's bad on the grass to cut it with a dull blade...gives it jagged
edges,frizzies so to speak. Hell, it takes only ten minutes to hit the blade
with a file, unless you've got one of those lawnmowers like what's his name with
three or four blades to cut your five acres.,

Sounds like you should get a good pair of scissors and cut the blades
individually. I might cut my grass for the third time this season
tomorrow, or I may just go to the track with The Mouse again

I've thought about getting out there with a pair of scissors and cutting the
blades to points. That would be cool.

In your case, the track sounds good. Do it, and take some video. When you're
making the video, let us know what number she is.

Do not fail at this task, Tosk.

Maybe I will take some today. We are doing some final prep for our
return to our old racing circuit this weekend. Hopefully, we got
something for 'em this season they don't expect

--
Rowdy Mouse Racing - We race for cheese!