Home |
Search |
Today's Posts |
#21
![]() |
|||
|
|||
![]()
del cecchi wrote:
"K Smith" wrote in message ... del cecchi wrote: snip Thanks for the patent pointer. The voice coil in a speaker or in a disk drive is in a magnetic field from a perm. magnet, and is attached to the cone or arm. I'm having trouble figuring out how the voice coil creates the fuel pressure. Push on a rod or diaphram maybe? I'll take a look at the patent when I am on wideband. del cecchi I mentioned at least a year ago that Ficht were mucking around with capacitors, trying yet again to get something for nothing (NB patent date 4 June 2002). Recovering energy from the magnetic field and storing it in a capacitor to be reused isn't something for nothing. Exactly!! & this encapsulates their problem, to take pressures from circulation to anything worthwhile in DFI terms (remember Yam are now up at 1000psi of petrol) then back down to circulation again to recharge the chamber in the time available per stroke for a high revving 2 stroke, takes energy & lots of it?? How much?? don't know, but you & Marcus were starting to work it out years ago but ...... The impact injectors don't really increase the fuel pressure they just impact velocity. The ups & downs cancel each other save some small spillage, which isn't even a pump as such. i.e. there is no actual displacement of the fluid. In short this is Ficht sans the name & if you read the patent look at the effort they've put into making sure there's no mention of what happens inside the "pump" part i.e. it's still the same old impact pump with the same original defects from 98 not enough pressure, not enough flow, not enough atomisation & still trying to meet regs with lean mixtures, all = detonation failures in too high a percentage to be a commercial proposition. Actually there is a patent under Bombardier for a spiffy new nozzle also. :-) And one on cold starting. They're prolific as OMC were. I think we've discussed before it's a tactic. Hard to imagine the workings of an injector for an idling 3hp engine, isn't it? Well it's a spruiking story I'm sure we'll hear oft enough as they try to sell these things again, we heard some doozies the first time around & as then some will believe & some won't, however I'm hoping this time people will be at least a bit wary of the dealers BS. snip It can't work any more than the original Ficht did & as then, the same NG dealer lackies will deceive, spruik & BS. K It's their job. :-) If they didn't believe the mfg, then they couldn't be dealers of that brand for long. I guess that's fair enough but this NG is different, if they want to advertise with deceptions there are plenty of forums etc for that, this is supposed to be open discussion without spam. I accept I overreact but don't apologise, I've had a flogging from these individuals over the years & will not be silenced by bullies this time anymore than I was the first time. I haven't had time to read the patents well enough to see if there is momentum involved or if it is a straightforward hydraulic pump deal. They don't say; the patent concentrates on the drive system. I suspect they have a license problem with Ficht if they use any of Ficht's material & clearly they're desperate to dump the Ficht name (don't blame them:-)) but to persist with the consumer funded experiments is outright sad, if not illegal. This time I'm betting the good ol' boys will sue on mass, as they should have the first time. K del |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Transom Height - Dumb Question Alert | General |