About Us

HK

wrote:
On Fri, 13 Feb 2009 14:30:01 -0500, HK wrote:

wrote:
On Fri, 13 Feb 2009 11:02:00 -0800 (PST), wrote:

On Feb 13, 1:24 pm, wrote:
On Fri, 13 Feb 2009 18:17:35 GMT, (Richard

Casady) wrote:
On Fri, 13 Feb 2009 07:29:13 -0800 (PST), wrote:
On Feb 13, 9:43 am, HK wrote:
Richard Casady wrote:
On Thu, 12 Feb 2009 20:46:13 -0500, D K
wrote:
The one thing I know for sure is the F90 is best
suited for a three-blade prop rather than a four.
Three is always more efficient than four. Four blades is a way to get
the blade area in a smaller diameter, if you lack space.
Casady
My admittedly limited experience with Yamaha taught me that the company
is pretty damned good matching up engines, props and boats, and that a
good dealer is also a valuable resource in prop selection. When I took
delivery of my 2008 model boat, the boat factory had just changed the
prop it spec'd for the boat and engine combo, upon a suggestion from
Yamaha. The factory sent me copies of performance print-outs for several
props. I was able to almost exactly duplicate the performance on the
factory print-out.
Almost every outboard boat I considered has performance sheets available
from the engine manufacturer, and those sheets specify props.
Really? How did they know your exact requirements as far as weight,
loading fore and aft, etc.?
They give you one in the middle of the range of props that are
individually ideal for one of the varying conditions. My sprint car
has a quick change rear axle. You can change the gear ratio in a
couple of minutes. There are three brands around, and they all have a
magnesium case. Stuff is brittle, but there are no impact loads. They
have variable pitch props for ships and planes.
Variable pitch props and adjustable pitch props are two different
things.- Hide quoted text -

- Show quoted text -
Um, and adjustable pitch prop IS variable.
Um, you are confused. "Variable Pitch Prop" is a technical term, not
common usage. It does not mean adjustable.

Just to step around the pile of Loogy**** left here, while my boat was
still being manufactured, I contacted the manufacturer and was put in
touch with the tech guys, who emailed a few prop-performance data sheets
to me, sheets from Yamaha and from tests they had run. Then, I had a
couple of phone discussions with Parker. In the end, I picked the prop
that most closely matched *my* parameters.

You shouda picked the prop that fit your BOAT'S parameters.

All the "possible" props fit the boat. They weren't *that* different.
One was a bit better match than the rest, producing a higher cruise
speed at my preferred RPMs.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A boating post!!!	Tom Francis - SWSports	General	4	December 12th 08 01:12 PM
boating post	CalifBill	General	16	December 2nd 08 02:59 PM
Boating post	Calif Bill	General	4	November 25th 08 12:11 AM
A boating post.	Bill McKee	General	13	November 9th 05 06:23 PM
Prop wrench size	David	General	5	November 3rd 04 01:06 AM

Menu

About Us