"Franky" wrote in message
ups.com...
Hello Group

Started the installation of an easyais unit today initially tried to
get the 4800 baud data into the NMEA port input on the s3 corepack but
it seems that it does not re transmit the data back out from the
corepack into the c70 plotter.

The AIS works great straight into the plotter at 4800 baud but that
means discopnnection of the S3 and means no heading data to the c70.

So will i need a multiplexer / combiner ?

Yes. First of all, setting the AIS receiver to 4800 is not wise in areas
with dense shipping because the bandwidth of a 4800 baud channel can be a
severe limitation.

We sell the MiniPlex-AIS, which is specially designed for use with
Raymarine's C/E displays. It is basically the same multiplexer as the one
Raymarine sells (the E55059, which we also produce), but with one 38400
input and the output cranked up to 38400 as well.

I see you're in the UK. We have a few dealers there and if they don't have
it in stock, we can ship to you directly.

Meindert
www.shipmodul.com