Home |
Search |
Today's Posts |
#1
posted to rec.boats.electronics
|
|||
|
|||
Anchor Winch stop/start/not reverse
Hi,
Before I call in the marine electrician does any one have some thoughts on following? Haven't used anchor winch for 12 months but occassionally ran it for a few seconds back and forth without problems. Took the boat out 2 weeks ago and anchor winch just clicked (relay?) when I tried to run it. Llater found that the line to the mooring buoy I was on was tensioned across the top of the winch. Relocated line and winch worked ok. i.e ran for a second to secure in roller. Last trip found that winch wouldn't work at all just clicked away. Checked voltage and quick check of contacts. Since have found that winch will sometimes run for a second or two but only in retrieve direction. The release button for some reason now also runs the winch in retrieve direction. Any suggestions on course for troubleshooting? Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
low oil pressure on reverse rotation engine | General | |||
Reverse rotation | General | |||
86 OMC cobra Reverse issue | General | |||
Power Trim problem: Motor comes up when putting in reverse | General | |||
transmission in reverse during sailing | General |