LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Report Post  
posted to rec.boats.electronics
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 7
Default Navtex Aerial cable

CS wrote:
What impedance is Navtex aerial cable?? - I think it is probably either
50 or 75 ohm.


I'd guess it is 50 ohms, because that is the default in radio world. TV
is the most common system that uses 75 ohms, almost everything else is
50 ohms.

The coaxial connectors for 50 and 75 ohm cables are different also on
the interconnecting side, so you might not want to plug a 75 ohm
connector to a radio that expects a 50 ohm connector. You can break or
stretch the connector on the radio side, if you use a wrong impedance
connector. As a result, a correct impedance connector might not make a
solid connection anymore.

Tapio
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
removal of steering cable from wheel unit - howto ? [email protected] General 0 September 2nd 05 03:01 AM
Help with Teleflex Safe-t qc helm and cable installation [email protected] General 0 August 7th 05 07:59 PM
OB Motor steering question tillius General 3 June 28th 04 12:36 PM
cable steering Gregory McGuire General 1 June 8th 04 12:52 AM
Radar Cable Connectors Steve Electronics 2 February 5th 04 08:13 PM


All times are GMT +1. The time now is 11:00 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017