Home |
Search |
Today's Posts |
#11
posted to rec.boats.electronics
|
|||
|
|||
Load In Use Indicator Circuit Needed
Hello:
Thanks to all for your thoughts. I ended up doing the reed relay trick. I used 12awg wire, 4 wraps around the body of the relay. It flickers just a bit, then locks on and gets my indicator lamp running. I didn't want to use less then 12awg wire as I was afraid of getting in trouble (the original cable is 10 awg). I could only get 4 wraps, so I went with that...... "jon doe" wrote in message ... Hi: Looking for a simple circuit idea that will tell us when a 12V DC load is activated. This is a critical load so we don't want to do anything that will make it unreliable. The circuit just has to activate a tiny relay when the load is going. Any ideas? Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
source needed for brackets | Electronics | |||
Drop that load down here. | General |