Home |
Search |
Today's Posts |
#22
|
|||
|
|||
"engsol" wrote in message
... On Mon, 14 Mar 2005 07:02:18 +0100, "Meindert Sprang" wrote: When you are installing this stuff for living, you very soon learn to appreciate the absence of fixed connectors on cables..... or do you want to make all holes in bulkeads bug enough for all connectors to push through..... just once..... Meindert Am I over looking something? Can't the cable be routed, then the connectors installed? Might make a neater installation, avoiding coils of excess cable....or cables which might be too short. No, you're not overlooking. But it just feels plain stupid to first cut the plugs, route the cables and then reassemble them. What would you like to do most: solder a plug with tiny contacts or just strip the wire, crimp on a pin and screw them into a screw terminal? And believe me, it's not just theory but this is backed up with measurements: a 4800 baud signal is just not going to produce interference because the last inch is not screened and connected to screw terminals. They are physically too small to be able to radiate enough energy to interfere with an SSB. Meindert |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
GpsMap 276C NMEA Interface Problem | Electronics | |||
Wireless 802.11 NMEA server | Electronics | |||
Essentials of a Marine Boat Alarm System | Electronics | |||
NMEA mutiplexer | Electronics | |||
NMEA Noise in SSB | Electronics |