| Home |
| Search |
| Today's Posts |
|
#4
|
|||
|
|||
|
"Chuck Tribolet" wrote in message ... Usually they come with a wiring harness. The hard part is figuring out which wire to attach to which. -- Your correct and I was thinking of a different model VHF. I check mine when I was on the boat and found that I did have a DIN plug with a couple feet of cable. Other end was 'raw'. Since that wasn't long enough to reach my GPS (hub), I wired it into a terminal strip and then ran two conductor wire to the hub. This DIN plug also had the remote speaker, hailer and something else, I don't remember. (And it's only been 6 weeks since I installed it.) Steve s/v Good Intentions |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| USING GPS WITH VHF RADIO (DSC) HELP | General | |||
| VANISHED (stolen?)- a new (and unique) 57' Beneteau | Cruising | |||
| Icom 402 radio woes..or is it my antenna system? | Cruising | |||
| Radio for Newbies...... | General | |||