Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Steve
 
Posts: n/a
Default The Capn Voyager, How accurate?

I was playing with my GPS yesterday (rainy day) and had it wired to my
laptop, running Capn 6.1.

I noticed that the GPS was displaying the Long. and Lat. to three (3)
decimal places while The Capn, was displaying it to 3 decimal places, the
least significate digit was always zero. There didn't appear to be any
'rounding' either.

However, The Capn cursor coordinates were always shown to a three decimal
place precision.

I should think, that if the program is going to display the vessel position
to only two decimal places of accuracy, they shouldn't display that third
digit as a zero. In engineering drawings, that third digit would indicate
that all accuracy should be assumed to the third decimal place.

I suspect that since the decimal digit is simply dropped, there is no such
degree of accuracy.

My "lesson learned", if I need high accuracy, I will look at the GPS
display, and ignore the Capn.

BTW. In this observation, I'm using a standard GPS without any external
enhancements.

My observation and opinions, FWIW.

Steve
s/v Good Intentions


  #2   Report Post  
Steve
 
Posts: n/a
Default The Capn Voyager, How accurate?

Just another thought.

Is the NMEA sentence capable of sending the Long. and Lat. to three decimal
places of accuracy??


Steve
s/v Good Intentions


  #3   Report Post  
Geoffrey W. Schultz
 
Posts: n/a
Default The Capn Voyager, How accurate?

"Steve" wrote in
:

Just another thought.

Is the NMEA sentence capable of sending the Long. and Lat. to three
decimal places of accuracy??


That's probably the problem. Look at how many digits your GPS is
outputting. My Capt'n display shows 3 digits.

-- Geoff
  #4   Report Post  
Meindert Sprang
 
Posts: n/a
Default The Capn Voyager, How accurate?

"Steve" wrote in message
...
Just another thought.

Is the NMEA sentence capable of sending the Long. and Lat. to three

decimal
places of accuracy??


Yes. According to the standard document, the Lat and Long. fields are
fixed/variable, meaning that there is at least degrees and minutes left of
the decimal point and a variable number of digits for the decimal fraction
of minutes. So this can be any precision the GPS manufacturer likes to
output, as long as it fits within the maximum sentence length :-)
My GPS OEM-module outputs 4 decimal digits.

Meindert


  #5   Report Post  
Larry W4CSC
 
Posts: n/a
Default The Capn Voyager, How accurate?

On Wed, 10 Sep 2003 11:47:06 -0700, "Steve" wrote:

Just another thought.

Is the NMEA sentence capable of sending the Long. and Lat. to three decimal
places of accuracy??


Absolutely! The M602 displays either the Garmin or Raymarine to 3
decimal places via the NMEA network from our multiplexer.....



Larry W4CSC

3600 planes with transponders are burning 8-10 million
gallons of kerosene per hour over the USA. R-12 car air
conditioners are responsible for the ozone hole, right?


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Capn Nav Software Sounds Problem Len Cruising 4 August 8th 04 02:54 AM
Capn' Voyager Duke-it Cruising 2 January 2nd 04 06:34 PM
The Cap'n 6.1 interface? Steve Electronics 2 July 29th 03 07:28 PM


All times are GMT +1. The time now is 11:24 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017