Not true. We intalled a Spartite systems 4 years ago and have
yet to have a leak.. It is as tight as when it was installed both around the
spar and around the collar. If it leaks soon after intallation, I suspect
that the surfaces were not prepared properly or the temperature
was not within range. Once the mast is pulled, I would not be
surprised if it does not seal totally.

Doug
s/v Callista

"Gogarty" wrote in message
...
Spar Tite is not a sealant. After installation it shrinks slightly and
will allow water to run down the mast. I use liquid BoatLife. Works
perfectly, also on the chain plates, because it flows readily into every
chink.