Home |
Search |
Today's Posts |
#10
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
"Larry" wrote in message
... "Capt. JG" wrote in : Actually, I haven't had to add a drop since the oil change. I feel the oil every time I check it, doesn't feel gritty. Because the fuel is a thin oil, you won't feel much difference until it's really contaminated with fuel. The lamp black color of it two minutes after you crank on new oil is the carbon blowby all diesels at these tremendous pressures have. It's so finely ground up, it doesn't feel gritty, either. Gritty would be like bearing grindings and very rare, indeed. I was thinking, perhaps wrongly, that an analysis would tell me if there was something going on that wouldn't be obvious by a drop in oil or in a burnt aroma, or stuff in it. It will if something's grinding apart or coolant is leaking in, another item that causes the level to rise...head gaskets/cracked block..yecch, ugly thoughts on Sunday morning. Very. Thanks! LOL I doubt I've run it 100 hours in 18 months... probably under 50. Ok, so what you need to do is to start changing oil at least every 4-6 months. A chemical change takes place between oil and the contaminants the engine introduces into it when running. These conttaminants break the oil down, hence the month limit on used oil life. Get the oil change gadget that makes it easiest on you and do it yourself. Don't reuse the filter. It'll run for decades, or until the rubber parts fail. Change the water pump impeller yearly. That's a pain but doable. I didn't mean to imply that it just sits... I do start it and run it for 10-15 minutes, either because I haven't run it in a while or because I'm going out or coming in. Does that make a difference? I don't mind changing it myself. The hardest part of doing anything with the engine is actually checking the oil. The dipstick is in on the starboard side about mid-engine, but the engine is offset in the bay, with the forward part inset to starboard. So, basically, I have to reach around it to get at the stick, which I can't see directly. Maybe I'm trying to fix something that isn't broke. :-} Everybody does that. Too much free worrying time influenced by libations...(c ![]() Heh.. -- "j" ganz @@ www.sailnow.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Single engine vs. twin engine | Cruising | |||
Hey Oz1, check out | ASA | |||
Can I reduce engine noise my insulating engine cover. | General | |||
Engine dies- Putters when trying to plane- engine under under heavy load | General | |||
Outboard Engine change out check list? | General |