Home |
Search |
Today's Posts |
#31
|
|||
|
|||
Watermakers and Chlorine -Correction for Steve D
Looks like you did my research for me.. I have been considering adding one
or two more membranes to my HRO sytem (it will handle up to 3 but currently has only one). The membrane prices look good to me, now I need to find the pressure vessels. Do you have any recommendations or words of wisdom on these?? Steve s/v Good Intentions |
#32
|
|||
|
|||
Watermakers and Chlorine -Correction for Steve D
Research is my middle name. :-)
There are two basic types. The white ones with black ends are made by A&M Composites in Houston. They have about 90% of the US market. The ones with the molded flair ends are made in Europe and are a good bit more expensive. Pacific RO has the best price I have found for the A&M vessels. http://www.pacificro.com/DePress2.htm You need the 1000 PSI 2.5x21 model at the bottom of the page. Hint: They don't like working with end users so sound "official" when you call. ;-) And don't mention my name. They got a little POed after they visited my site and figured out I was not really a "dealer". Steve wrote: Looks like you did my research for me.. I have been considering adding one or two more membranes to my HRO sytem (it will handle up to 3 but currently has only one). The membrane prices look good to me, now I need to find the pressure vessels. Do you have any recommendations or words of wisdom on these?? Steve s/v Good Intentions -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
#33
|
|||
|
|||
Watermakers and Chlorine -Correction for Steve D
Research is my middle name. :-)
There are two basic types. The white ones with black ends are made by A&M Composites in Houston. They have about 90% of the US market. The ones with the molded flair ends are made in Europe and are a good bit more expensive. Pacific RO has the best price I have found for the A&M vessels. http://www.pacificro.com/DePress2.htm You need the 1000 PSI 2.5x21 model at the bottom of the page. Hint: They don't like working with end users so sound "official" when you call. ;-) And don't mention my name. They got a little POed after they visited my site and figured out I was not really a "dealer". Steve wrote: Looks like you did my research for me.. I have been considering adding one or two more membranes to my HRO sytem (it will handle up to 3 but currently has only one). The membrane prices look good to me, now I need to find the pressure vessels. Do you have any recommendations or words of wisdom on these?? Steve s/v Good Intentions -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Watermakers and Chlorine | Boat Building |