Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Comments interspersed throughout:
"rhys" wrote in message news ![]() OK, I've got an old 33 footer powered by an Atomic 4...currently in rebuild mode. Trust me...I've thought of this. I'm looking for a boat to enjoy upon retirement this May. Being poor, I'll have to settle for an older boat, 30-32 feet. I've seen a number of boats in my price range on my list, but have rejected the ones with an OB. But then I got to wondering...should I do so? snipped some good bits that were here Advantages: ease of access, Debateable actually, if you're out sailing and the weather is deteriorating, say it's starting to rain and blow and you are having engine troubles, try working on that 100 lb outboard while its hanging over the stern in the wind and the rain. See what I mean? Not too hard to loose some small part or tool overboard. With an inboard you're down below, probably uncomfortable and dropping things, but they are still in the boat and you aren't opening the engine to rain and spray. more god bits snipped Disadvantages: Easy to steal, easy to swamp in a seaway, I've been out in a 35 footer (40% ballast ratio) in a lake on days when occasionally water came over the stern from pitching while motoring into a strong wind. I have a feeling that would be the end of the OB, especially with the increased hobbyhorsing you'd get with all that extra weight so far aft alternately lifting the prop out of the water and then driving it back in. more good bits snipped here "rhys" wrote in message ... On Thu, 12 Feb 2004 22:20:52 -0800, engsol wrote: Thanks....you've given me a number of considerations that hadn't occured to me....fuel storage...theft...etc. On the other hand, some things aren't a factor, such as a windvane. Thanks again. Norm My pleasure. I can't answer my own question as to why boats over 27' rarely, if ever, feature an outboard, but as I've lost significant sailing time in the last few years due to mishaps with my inboard engine, it certainly has occurred to me. In my case, with a pinched reverse transom IOR-style stern, an outboard and its pivoting mount would adversely affect its looks, and I like the boat's looks... Oh, here's another downside: a lot of weight in the stern can affect the balance of the boat and lead to unnecessary or undesirable "hobbyhorsing" in certain sea conditions. To a degree, this is offset by a high ballast ratio which on some older racer-cruisers is 40-50%, but other models would "feel" 100-120 lbs. off the stern more than others, just as they would "feel" 200 feet of chain and a 66 lb. Bruce anchor at the bow. That's why you'd want to strike a balance between OB power and getting it off the stern: the trim settings of an OB can mitigate somewhat its weight, but when it's off and stowed out of the water, it's like having a woman hanging off the stern rail. Which may appeal...I dunno...G R. |
#2
![]() |
|||
|
|||
![]()
On Fri, 13 Feb 2004 22:33:33 -0400, "Ken Heaton"
wrote: Advantages: ease of access, Debateable actually, if you're out sailing and the weather is deteriorating, say it's starting to rain and blow and you are having engine troubles, try working on that 100 lb outboard while its hanging over the stern in the wind and the rain. See what I mean? Not too hard to loose some small part or tool overboard. With an inboard you're down below, probably uncomfortable and dropping things, but they are still in the boat and you aren't opening the engine to rain and spray. I agree...I was referring more to the access while at dock...you can lash a pram under the transom and with a bucket and small tool kit, do 90% of your maintenance in the nice fresh air and sunshine, instead of in a dimly lit cave. more god bits snipped Man, and I thought crucifixion was nasty...god bits, indeed! R. |
#3
![]() |
|||
|
|||
![]()
On Fri, 13 Feb 2004 22:33:33 -0400, "Ken Heaton"
wrote: Advantages: ease of access, Debateable actually, if you're out sailing and the weather is deteriorating, say it's starting to rain and blow and you are having engine troubles, try working on that 100 lb outboard while its hanging over the stern in the wind and the rain. See what I mean? Not too hard to loose some small part or tool overboard. With an inboard you're down below, probably uncomfortable and dropping things, but they are still in the boat and you aren't opening the engine to rain and spray. I agree...I was referring more to the access while at dock...you can lash a pram under the transom and with a bucket and small tool kit, do 90% of your maintenance in the nice fresh air and sunshine, instead of in a dimly lit cave. more god bits snipped Man, and I thought crucifixion was nasty...god bits, indeed! R. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Question about older Mercruiser inboard | General | |||
Outboard vs. Inboard | General | |||
Recommend HP + mounting outboard - 27' Sailboat? | Boat Building | |||
Converting I/O to Outboard with Jack Plate | General | |||
Some General Outboard Info Needed | General |