wrote:
On Jan 29, 9:14 am, GeoffSchultz
wrote:
Once again I will state that you need to look at the system as a
whole. ...

It seems quite possible that the refresh and positioning problems
could be a result of network issues. A bad cable or connection or a
faulty talker could be overwhelming the network with bad packets.
This happens on LANs all the time and is one of the potential
downsides of networked instrument systems.

... As far as RayMarine tech support, I have always found
them very reasonable to deal with if you approach them with a
reasonable attitide. ...

I guess the tech support must be hit or miss. I've never gotten any
satisfaction from them and I've tried hard. Also, my experience with
my Raytheon radar has been mixed at best and I would not recommend it.
Although, that's a moot point as they have moved on the their new
tech.

--Tom.

His friend has the same issues on his. Two faulty talkers?
Gordon

On Jan 29, 9:54 am, Gordon wrote:
... His friend has the same issues on his. Two faulty talkers? ...

That wouldn't surprise me, but bad cables are more common. It is
super easy to make a bad cable and the installer will probably have
had to make up several in each network. Of course, Raymarine could
have screwed-up the cables, too. In my experience, now very dated,
faulty cables made up the majority of problems on LANs followed by bad
NICs. We occasionally got whole lots of faulty NICs... Switch
failure was pretty rare.

-- Tom.