| Home |
| Search |
| Today's Posts |
|
|
|
#1
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 4:28*am, Justin C wrote:
What makes a boat a "high latitudes" cruiser? It's a term I've seen a few times and I'd like to know what makes it different to a "blue water" cruiser. Justin C, by the sea. Hey Justin: They need to be designed by a navel architect for specific areas of operation not a marketing vp who wants a cheep fleet for their bare boat charter fleet in margarita Ville. Think "slow... heavy... stout" = expensive. Small cockpits but people dont like them cause they cant intertain a cocktail party. Think small port lights 7"x15" with 3/8" glass not picture widows like Red Cloud has.... uh, had. Think all groco bronze through hulls not plastic. Think "small" sail plan 15.0 SA/D Ratio. Mine boat is 14.7 cutter. But now some one will say, "but if you have a fast boat you can out run a storm." to that I say, bull****. I have one. I live at N45. Just need to drive it hard. .............. absolutly wonderfull ! Bob |
|
#2
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 7:44*am, Bob wrote:
port lights 7"x15" with 3/8" glass not picture widows like Red Cloud has.... uh, had. Think all groco bronze through hulls not plastic. Think "small" sail plan 15.0 SA/D Ratio. Mine boat is 14.7 cutter. http://sports.webshots.com/photo/205...63212926eSPzLW 3/8 glass is for put'z like you Bob. RedCloud has 3/4" and 1" thick armoured glass in bronze ports. Think Monel not bronze thru hulls in ice. BTW look at the big picture windows on this boat: http://www.damocles-eu.org/artman/up...ara-arctic.jpg Tara's been iced in for many mo's now. Joe But now some one will say, "but if you have a fast boat you can out run a storm." *to that I say, bull****. I have one. I live at N45. Just need to drive it hard. .............. absolutly wonderfull ! Bob |
|
#3
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 8:54*am, Joe wrote:
* 3/8 glass is for put'z like you Bob. RedCloud has 3/4" and 1" thick armoured glass in bronze ports. Think Monel not bronze thru hulls in ice. Joe And Red Cloud is where???????????????? as I use to say years back, "on the bottom." Or did the owners find that perfectly good boat which scared them so badly they had to call for Mr. Wizzard to take them back home. Getting iced in aint such a feat. Heck, when I spent two winters at the marina on RM 271 of the Columbia River there were McGregors, Ericksons, catalinas even a couple paddle boats too. all frozen solid in 6" thick marina ice. Your point is what again? Bob |
|
#4
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 12:27*pm, Bob wrote:
On Jan 28, 8:54*am, Joe wrote: * 3/8 glass is for put'z like you Bob. RedCloud has 3/4" and 1" thick armoured glass in bronze ports. Think Monel not bronze thru hulls in ice. Joe And Red Cloud is where???????????????? as I use to say years back, "on the bottom." Or did the owners find that perfectly good boat which scared them so badly they had to call for Mr. Wizzard to take them back home. WTF does that have to do with ports and the thickness of the glass? 3/8" ...you might as well have Saran wrap. RedCloud loss had nothing to do with her ports even if she still had as you said " picture widows like Red Cloud has.... uh, had." Just shows you know nothing about anything, cept being an asshole. Getting iced in aint such a feat. Heck, when I spent two winters at the marina on RM 271 of the Columbia River there were McGregors, Ericksons, catalinas even a couple paddle boats too. all frozen solid in 6" thick marina ice. Your point is what again? Point is your an asshole Bob. Joe Bob |
|
#5
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 11:09*am, Joe wrote:
Point is your an asshole Bob. Joe Well, Joe.......... Your right about the 3/8" glass thing. I have 3/8" polycarb not glass. My mistake. Also, as you say, I may very well be an asshole. But better an asshole that than a pansy ass pussy. What else ya got to blow out ur ass? Bob |
|
#6
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 1:34*pm, Bob wrote:
On Jan 28, 11:09*am, Joe wrote: Point is your an asshole Bob. Joe Well, Joe.......... Your right about the 3/8" glass thing. I have 3/8" polycarb not glass. My mistake. Either one will be good enough for sitting at the dock. Also, as you say, I may very well be an asshole. But better an asshole that than a pansy ass pussy. Well I guess you stepped up from a pansyass pussy to an asshole...congrats you're going places Bob. What else ya got to blow out ur ass? You...I'll make sure to flush. Joe Bob |
|
#7
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 11:51*am, Joe wrote:
Well I guess you stepped up from a pansyass pussy to an asshole...congrats you're going places Bob. What else ya got to blow out ur ass? You...I'll make sure to flush. Joe Joe, you gaveup to easy! I was hopping for a better school yard ****ing match. Iv been up since 4am and am gettting a bit board. So where is Red Cloud?? Bob |
|
#8
posted to rec.boats.cruising
|
|||
|
|||
|
In article , Joe wrote:
On Jan 28, 7:44*am, Bob wrote: port lights 7"x15" with 3/8" glass not picture widows like Red Cloud has.... uh, had. Think all groco bronze through hulls not plastic. Think "small" sail plan 15.0 SA/D Ratio. Mine boat is 14.7 cutter. http://sports.webshots.com/photo/205...63212926eSPzLW I've not been here long, but I looked back over some past stuff when the posts querying your whereabouts appeared a while back. She does look a tough old boat, and I'm sorry to hear she's lost. 3/8 glass is for put'z like you Bob. RedCloud has 3/4" and 1" thick armoured glass in bronze ports. Think Monel not bronze thru hulls in ice. BTW look at the big picture windows on this boat: http://www.damocles-eu.org/artman/up...ara-arctic.jpg Nice setting! It certainly looks at home there. I've looked around the site there a little more, looks like it was custom built. I suppose my next question is "what's a high lattitude?". I'd love to get up far enough north to see 'bergs. Justin. -- Justin C, by the sea. |
|
#9
posted to rec.boats.cruising
|
|||
|
|||
|
Bob wrote:
On Jan 28, 4:28 am, Justin C wrote: What makes a boat a "high latitudes" cruiser? It's a term I've seen a few times and I'd like to know what makes it different to a "blue water" cruiser. Justin C, by the sea. Hey Justin: They need to be designed by a navel architect for specific areas of operation not a marketing vp who wants a cheep fleet for their bare boat charter fleet in margarita Ville. Think "slow... heavy... stout" = expensive. Small cockpits but people dont like them cause they cant intertain a cocktail party. Think small port lights 7"x15" with 3/8" glass not picture widows like Red Cloud has.... uh, had. Think all groco bronze through hulls not plastic. Think "small" sail plan 15.0 SA/D Ratio. Mine boat is 14.7 cutter. But now some one will say, "but if you have a fast boat you can out run a storm." to that I say, bull****. I have one. I live at N45. Just need to drive it hard. .............. absolutly wonderfull ! Bob I've got a Brewer designed Murray 33. 10AWG steel, 16,000lbs, 2" urethane foam insulation, cutter rig. Drive it REAL hard. From Ted's web site: # LOA---33' 0" # LWL---26' 9" # BEAM---10' 11" # DRAFT---4' 11" # BALLAST---5000 lbs. # SAIL AREA---535 sq. ft. # DISPLACEMENT---13130 lbs. (No, 16,000 light on scale) # DISPL/LENGTH RATIO---306 # SA/DISPL RATIO---15.4 # PRISMATIC COEFF---.545 # CAPSIZE SCREENING FACTOR---1.86 # TANKS---30 gals. Fuel, 50-60 gals. Water |
|
#10
posted to rec.boats.cruising
|
|||
|
|||
|
On Jan 28, 5:21*pm, hpeer wrote:
I've got a Brewer designed Murray 33. 10AWG steel, 16,000lbs, 2" urethane foam insulation, cutter rig. Drive it REAL hard. Hey, I heard the name but never seen one..... Just searched and found this http://www.tedbrewer.com/sail_steel/murray33.htm Damn.............. that is a stout boat! Humm, steel in 33 feet, no bow sprit! Cool. Sorta looks like a Cascade on the underside. Must be fun. Do you live on it? Back to what is high lats......... I found that saling types in San Diego and LA call SF northern california, Those in SF call north of 45 bad and woolly. those of us at N45 look at 48N and go burr and then there are those fools north of the 50 line ?!?!?!? WTF is that all about? Spent two summers in the Bering on some 80' boats. figure a blow once every 1-2 weeks of 40k-50k and 20-30' seas. of course there is the 1-2 days of building and then 1-2 days abating. not bad overall. I got to see the sun twice. Once for about 30 min the other for about 10 min.............. But sitting in a 33' sailboat in that stuff would be significanlty diffrent than sitting in a hot tub drinking hot sake while someone else is driving the boat ![]() Bob |
| Reply |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Latitudes and Attitudes Magazine now Free! | General | |||
| Latitudes and Attitudes now Free! | ASA | |||
| Latitudes and Attitudes Magazine is now Free! | Cruising | |||
| Latitudes and Attitudes Magazine Now Free! | General | |||
| Yachting In Northern Latitudes | Tall Ship Photos | |||