On Oct 24, 5:22 pm, the_bmac wrote:
Have any of you re-fitted with a split backstay tensioner? Can you share details about how you
installed/reinforced the attachments through the deck?

This might provide some food for though: http://www.harken.com/rigtips/back.php.
Sorry not to be more specific on chain plates and such, but it's hard
to guess what will work for you without know what boat you have...

-- Tom.

On Oct 25, 3:13 am, " wrote:
On Oct 24, 5:22 pm, the_bmac wrote:

Have any of you re-fitted with a split backstay tensioner? Can you share details about how you
installed/reinforced the attachments through the deck?

This might provide some food for though:http://www.harken.com/rigtips/back.php.
Sorry not to be more specific on chain plates and such, but it's hard
to guess what will work for you without know what boat you have...

-- Tom.

I did this on my current boat without drilling any holes.

For the tensioner I used an off the shelf backstay tensioner (http://
images.westmarine.com/full/05412_f.jpg)

Then I got some longer pins for the existing chainplates and attached
some dinghy shroud adjuster fittings (a couple of flat tangs would do
as well) to the existing chain plates using the longer pins. The
other end of the fittings anchor the backstay adjuster blocks etc.

This arrangement has worked flawlessly for close to ten years now.

Cheers

Matt
PY26,#129, Mischief

wrote:


I did this on my current boat without drilling any holes.

I'm liking that idea

For the tensioner I used an off the shelf backstay tensioner (http://
images.westmarine.com/full/05412_f.jpg)

Then I got some longer pins for the existing chainplates and attached
some dinghy shroud adjuster fittings (a couple of flat tangs would do
as well) to the existing chain plates using the longer pins. The
other end of the fittings anchor the backstay adjuster blocks etc.

Then I'm guessing you already have a split-backstay?

On Oct 25, 10:29 am, the_bmac wrote:
wrote:

I did this on my current boat without drilling any holes.

I'm liking that idea

For the tensioner I used an off the shelf backstay tensioner (http://
images.westmarine.com/full/05412_f.jpg)

Then I got some longer pins for the existing chainplates and attached
some dinghy shroud adjuster fittings (a couple of flat tangs would do
as well) to the existing chain plates using the longer pins. The
other end of the fittings anchor the backstay adjuster blocks etc.

Then I'm guessing you already have a split-backstay?

Right. The boat came with the split backstay. I added the tensioner.

Matt