"noexpert" wrote in message
...
Are solid stainless steel rods any less vulnerable?
What alloy is used for major standing rigging; there must be some less
prone to chloride/stress attack, or?
I worked with some higher than 316 plus extra titanium alloy(32?) for
seawater boiler; it was a much better choice than regular 316.
I am not sure if this alloy is being offered in steel rope shape.
Any one knows more about it?
thanks


Navtec rod rigging uses an alloy they call "Nitronic". It is supposed to be
much more resistant to corrosion than the alloys commonly used in wire
rigging and turnbuckles.

I remember the collapse of a public pool ceiling killing a number of peoples
in switzerland some years ago.
The hang up ceiling was supported by hidden 304 type (18-8) S-hooks behind
and out of sight for inspection.
I recall the report stating that the chloride laden pool air and humidity
exposed the hooks causing this intercristaline corrosion leading to sudden
failure to support loads.
As I understand the engineering world in Europe took note and better suited
s/s alloys are utilised now.

If rigging for ocean going boats is still made from 304, I think it amounts
to criminal negligence to continue to equip boots with these essential
structural members in a maritime environment where plenty of chloride (salt)
are present.

Having worked with both 304 , 316 and others the price difference of those
different alloys were not really the mainconcern but mainly to get the right
stock for the task on hand.

I am not clear what the nitronic s/s alloy is made of, but if it is more
suitable why bother with 304 at all.