LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
bushman
 
Posts: n/a
Default

Larry:
I think you are right that I do have injector issues, but I think they are
just old. The engine starts as soon as the key is turned. The only smoke is
a black puff when you floor it and maybe a little black when at full
throttle. The prop is clean and from all acounts was correctly sized by the
boat builder 17X17. Hull speed is reached at about 2K at one gallon per
hour, full throttle in gear is 3K, in nuetral is 4K+ (max rpm per Perkins).
My plan is to replace the injectors myself then hire a mechanic to adjust
the valves and check the pump timing. I hope this will get me more economy
as I have more than enough power now. The more I work on it the more I think
of pulling it out and rebuilding. The savings in leaking oil would pay for
it in 5 years or so.
- Allen


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
perkins water flow direction krj Cruising 7 September 17th 05 02:37 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 March 30th 05 06:35 AM
rec.boats.paddle sea kayaking FAQ [email protected] General 0 January 28th 05 05:46 AM
Raw Water Pump Priming Tony Abbott General 6 September 20th 04 10:14 PM
Where to find ramp stories? designo General 15 December 9th 03 08:57 PM


All times are GMT +1. The time now is 09:46 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017