Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Silly argument. Oil is cheap. Engines are not. To err on the side of excess
does no harm and may do some good. Besides, when you change the oil in spring that you put in in the fall you must first run the enine and bring it up to operating temperature to reduce the viscosity of the oil so you can get it out. This serves several purposes. The engine doesn't just sit there over the winter. It aspirates and water condenses inside it. Because you have clean oil in there that water does not form bearing-eating acid. The additives in the clean oil neutralize the acids. Then running the engine with the fall oil flushes all operating parts. The spring oil works fine over the summer because the engine is often at operating temperature and condensation is little problem. And yes, I have indeed chnaged the oil and then immnediatley chnaged it again. Can't quite remember why but it certainly did no harm at small expense. As for my car, it's a diesel too. It works very, very hard and I let my mechanic look after it. To repeat: Oil is cheap. Engines are not. As for grade, Castrol Heavy Duty SAE 30. No multi-viscosity. That's for the car. Why? Car engine runs from 800 RPM to 4,000 RPM and back over and over. Boat engine, except when idling, runs a constant 2,100 RPM. |
#2
|
|||
|
|||
After having the engine rebuild, I was told to only use IDO (Industrial
Diesel Oil) SAE 30 or its exact equilvalent. Esso also makes a SAE 30 lubricating oil for diesel engine. I sure that you can get other brands it just that these are the only one I get locally. I my area I can only get Castrol 10w40 for diesel engine. The other question is when to you change your oil filter. In the spring or the fall ( before launching or before haul out org ) ? Oil filter are not that expensive. In my case I was able to get Fram's exact equilvalent filter for my Yanmar. "Gogarty" wrote in message ... Silly argument. Oil is cheap. Engines are not. To err on the side of excess does no harm and may do some good. Besides, when you change the oil in spring that you put in in the fall you must first run the enine and bring it up to operating temperature to reduce the viscosity of the oil so you can get it out. This serves several purposes. The engine doesn't just sit there over the winter. It aspirates and water condenses inside it. Because you have clean oil in there that water does not form bearing-eating acid. The additives in the clean oil neutralize the acids. Then running the engine with the fall oil flushes all operating parts. The spring oil works fine over the summer because the engine is often at operating temperature and condensation is little problem. And yes, I have indeed chnaged the oil and then immnediatley chnaged it again. Can't quite remember why but it certainly did no harm at small expense. As for my car, it's a diesel too. It works very, very hard and I let my mechanic look after it. To repeat: Oil is cheap. Engines are not. As for grade, Castrol Heavy Duty SAE 30. No multi-viscosity. That's for the car. Why? Car engine runs from 800 RPM to 4,000 RPM and back over and over. Boat engine, except when idling, runs a constant 2,100 RPM. |
#3
|
|||
|
|||
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
REVELATION OF THE CHANGE FROM CHRISTIAN TO CATHOLIC AND THE BIBLE | General | |||
O.T. Lets change the rules again | General | |||
How to change trailer winch cable on land? | General |