I have a couple of questions about changing the bulb in an Aqua-Fit
series 40 tricolor/anchor light.

First of all, how do you get to the bulbs to remove them? There's a
metal plate on the top. removing it doesn't seem to do anything. The top
is as firmly attached without it as it is with it. There's an "on-off"
ring around the bottom but that appears to be for the "quicfit"
attachment. I'm very impressed with how well the light is made, but
there must be a way (other than a hammer) to get at the bulbs.

The second question is are LED replacements available for the 10W bulbs
these use? (Assuming I can get the old bulbs out of course.)

Thanks

Cindy

--
The email address above is a spam trap. Don't expect a response.
Reach me using firstname at lastname dot net

I have a couple of questions about changing the bulb in an Aqua-Fit
series 40 tricolor/anchor light.

First of all, how do you get to the bulbs to remove them? There's a
metal plate on the top. removing it doesn't seem to do anything. The top
is as firmly attached without it as it is with it. There's an "on-off"
ring around the bottom but that appears to be for the "quicfit"
attachment. I'm very impressed with how well the light is made, but
there must be a way (other than a hammer) to get at the bulbs.

Hi Cindy,

Here's a link to a spec sheet on the series 40:

http://www.aquasignal.de/pdf/lob2004/S018_019.pdf

The second page shows the light disassembled, maybe this will help.



--

=-------------------------------------------------=
Renewontime
A FREE email reminder service for licensed mariners
http://www.renewontime.com
=-------------------------------------------------=

Twist the ring to the unlock position and pull up on the lens assembly.

renewontime dot com wrote:

I have a couple of questions about changing the bulb in an Aqua-Fit
series 40 tricolor/anchor light.

First of all, how do you get to the bulbs to remove them? There's a
metal plate on the top. removing it doesn't seem to do anything. The
top is as firmly attached without it as it is with it. There's an
"on-off" ring around the bottom but that appears to be for the
"quicfit" attachment. I'm very impressed with how well the light is
made, but there must be a way (other than a hammer) to get at the bulbs.


Hi Cindy,

Here's a link to a spec sheet on the series 40:

http://www.aquasignal.de/pdf/lob2004/S018_019.pdf

The second page shows the light disassembled, maybe this will help.

Cindy Ballreich wrote:
I have a couple of questions about changing the bulb in an Aqua-Fit
series 40 tricolor/anchor light.

You can remove the entire assembly, or just part of it, by twisting the
light on its mount. Careful though, since I know from experience that
these lights don't bounce well.

--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://kerrydeare.home.comcast.net/

krj wrote:
Twist the ring to the unlock position and pull up on the lens assembly.

renewontime dot com wrote:



Hi Cindy,

Here's a link to a spec sheet on the series 40:

http://www.aquasignal.de/pdf/lob2004/S018_019.pdf

The second page shows the light disassembled, maybe this will help.




These were both really helpful! Thanks guys, we got it open (without
breaking anything).

Cindy

--
The email address above is a spam trap. Don't expect a response.
Reach me using firstname at lastname dot net