Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 2nd 05, 12:43 PM
Raju V.K
 
Posts: n/a
Default Volvo penta ad41 engine starter problem

We are having a speed launch with volvo penta ad41 engine. The starter
motor was broaken down due to damage to its needle bearing coming in
the drive end of the armature shaft. Our efforts to find a replacement
was failed. there is no part number or any identification on the
bearing or in the manual for this bearing. If any body knows the
bearing number or any information to purchase a replacement is
requested to inform us. any info is very much appreciated.


Regards

Raju V.K.
Kerala Shipping and Inland Navigation Corporation Ltd.
Kerala,
India

  #2   Report Post  
Old February 2nd 05, 02:39 PM
Tim
 
Posts: n/a
Default


Raju V.K wrote:
We are having a speed launch with volvo penta ad41 engine. The

starter
motor was broaken down due to damage to its needle bearing coming in
the drive end of the armature shaft. Our efforts to find a

replacement
was failed. there is no part number or any identification on the
bearing or in the manual for this bearing. If any body knows the
bearing number or any information to purchase a replacement is
requested to inform us. any info is very much appreciated.


Regards

Raju V.K.
Kerala Shipping and Inland Navigation Corporation Ltd.
Kerala,
India



What is the actual make and model of the engine? and does the starter
motor have an identification? like "Lucas" "Marelli" "Hitachi" and a
model number? post what you can and I'll see what I can do.

Tim

  #3   Report Post  
Old February 3rd 05, 09:15 AM
 
Posts: n/a
Default

The starter motor is "valeo D9R116" there is no other ifo available
Regards,

Raju

  #4   Report Post  
Old February 4th 05, 12:03 AM
Tim
 
Posts: n/a
Default

The starter motor is "valeo D9R116" there is no other ifo av?ailable
Regards,

Raju, I got caught un awares today and didn't get a chance to get ahold
of my Valeo dealer, but I'll try again tomorrow.

If anything else, it could be possible to have a brass bushing machined
to fit in the needle bearings place.

I'll still see if I can find a needle bering number for you.


Tim

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Volvo Penta 5.7GSi Alarm Problem =|8-\)~ General 2 September 20th 04 12:00 AM
Loss pf Power problem with Yanmar Engine Jerry Poore Cruising 3 June 26th 04 05:02 PM
Honda 4 stoke Engine Problem Dennis Cruising 2 November 1st 03 02:25 PM
Volvo penta starts without key in the ingintion Todd Fleming General 4 July 24th 03 04:18 AM
Volvo Penta (EFI) engine starting problem Larry Buss General 0 July 19th 03 06:19 AM


All times are GMT +1. The time now is 02:50 AM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017