"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?

You need something that works fast on grease, but won't mess with the
plastic. Put on some gloves and use a very concentrated solution of Dawn
dish liquid applied with the rough side of a two-sided dish sponge. Whatever
doesn't come off with that doesn't matter unless you're anal about seeing
perfect yellow.

After the cord dries, apply a light coating of ArmorAll or Son of a Gun to
help maintain flexibility.

Its not great. Made the mistake of wasting money on it once.

--
--
Karl Denninger ) Internet Consultant & Kids Rights Activist
http://www.denninger.net My home on the net - links to everything I do!
http://scubaforum.org Your UNCENSORED place to talk about DIVING!
http://www.spamcuda.net SPAM FREE mailboxes - FREE FOR A LIMITED TIME!
http://genesis3.blogspot.com Musings Of A Sentient Mind

In article ,
Doug Dotson wrote:


Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list

Doug
s/v Callista

"Wayne.B" wrote in message
.. .
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?

In article ,
Doug Dotson wrote:

Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list

Doug
s/v Callista
==================================================
On Sun, 14 Nov 2004 16:39:50 GMT, (Karl
Denninger) wrote:

Its not great. Made the mistake of wasting money on it once.

==================================================

I agree. I was having better luck with Simple Green and a 3M scrubbing
pad. I've been reluctant to try anything more agressive out of
concern for ending up with sticky cables. Once that happens, the
rubber breaks down and sheds on to everything.

Glad I never tried anything to clean them. Just not worth it to
impress the neighbors.

Doug
s/v Callista

"Wayne.B" wrote in message
...
In article ,
Doug Dotson wrote:

Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list

Doug
s/v Callista
==================================================
On Sun, 14 Nov 2004 16:39:50 GMT, (Karl
Denninger) wrote:

Its not great. Made the mistake of wasting money on it once.

==================================================

I agree. I was having better luck with Simple Green and a 3M scrubbing
pad. I've been reluctant to try anything more agressive out of
concern for ending up with sticky cables. Once that happens, the
rubber breaks down and sheds on to everything.

On Sun, 14 Nov 2004 17:07:22 -0500, "Doug Dotson"
wrote:

Glad I never tried anything to clean them. Just not worth it to
impress the neighbors.

=====================================

It was more a matter of trying not to depress them. :-)

Also the contrast of my nice new dock with grungy cables was a
fearsome sight.

I don't know how long it will last, but the Starbrite cleaner removed the
sticky film from the cable that had been getting on the deck. Didn't take
too long --my cable is only 25 ft.
It was either clean the cable or the deck, or get a new cable.

On Sun, 14 Nov 2004 22:03:55 -0500, "Garland Gray II"
wrote:
I don't know how long it will last, but the Starbrite cleaner removed the
sticky film from the cable that had been getting on the deck. Didn't take
too long --my cable is only 25 ft.
It was either clean the cable or the deck, or get a new cable.

===================================

Interesting, I'll have to try it on an old fender that has gotten to
the sticky film stage. With fenders I usually just toss them out and
buy new but these 50 amp shore power cables are 50 feet each and have
the look of big replacement $$$s about them.

I think a 50' 50A cable is just under $600. OUCH!

"Wayne.B" wrote in message
...
On Sun, 14 Nov 2004 22:03:55 -0500, "Garland Gray II"
wrote:
I don't know how long it will last, but the Starbrite cleaner removed the
sticky film from the cable that had been getting on the deck. Didn't take
too long --my cable is only 25 ft.
It was either clean the cable or the deck, or get a new cable.

===================================

Interesting, I'll have to try it on an old fender that has gotten to
the sticky film stage. With fenders I usually just toss them out and
buy new but these 50 amp shore power cables are 50 feet each and have
the look of big replacement $$$s about them.

On Sun, 14 Nov 2004 23:14:09 -0500, "Doug Dotson"
wrote:

I think a 50' 50A cable is just under $600. OUCH!

========================================

I haven't priced them but wouldn't be surprised. Each one is about an
inch in diameter.

Starbrite actually makes a pretty effective shore power cable cleaner. Use
it with Scotchbrite pads, and it'll work better than most anything I've
found. You can also try Simple Green with Barkeeper's Friend scrubbing
powder. Don't use any solvents, or you will certainly ruin them.

--


Keith
__
No husband has ever been shot while doing the dishes.
"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?