So you're still insisting the 3-strand nylon is destroyed by stretching 4%? Why do
you suppose NE Ropes describes it as having "high elongation" and has a chart showing
"working elongation" of over 20%?

Don't be such a coward jaxie. Be a man and just admit you made a mistake. Guess
that's too much of a stretch for you.


"JAXAshby" wrote in message
...
no, I am sick and tired of attempting communication with a blithering idiot.
no effort on my part will ever help you understand even the most simple of
concepts, for for you to accept understanding with another's help clearly shows
-- to you -- that you didn't understand even the simplest of concepts by
yourself.

you are unteachable, jeffies. you probably STILL don't realize that red stop
lights are higher than green lights, and for sure when you do realize that
elemental fact you will have no idea why.

tie up with a clothesline, jeffies.

From: "Jeff Morris"
Date: 11/11/2004 8:36 AM Eastern Standard Time
Message-id:

In other words, you can't figure out the difference between nylon and
polypropylene.
Its a good thing you never go sailing.


"JAXAshby" wrote in message
...
jeffies, stay tied to the dock. again. you are lost to this universe.
still.
this subject is way beyond you. as always.

From: "Jeff Morris"
Date: 11/10/2004 9:45 PM Eastern Standard Time
Message-id:

I was right, you don't know the difference between nylon and polypropylene.
Are you
really claiming nylon fails after stretching 4%? Why do you think NE
Ropes
says
nylon 3-strand has "high elongation"?

Here's the link again. Nylon 3-strand: 15% working elongation at 15%
tensile

strength. (OK, maybe 14%)
http://www.neropes.com/techdata/3strand.pdf

"JAXAshby" wrote in message
...
jeffies, go read the damned thing. then read it again, and again and
again.
then if you STILL don't understand what it says, go look at plaited rope
vs
elongation, and THEN look at springy mountain climbing rope.

4 frickin' %, jeffies. get your wife to explain it to you.



From: "Jeff Morris"
Date: 11/10/2004 8:17 PM Eastern Standard Time
Message-id:

Read what, jaxie? The chart is very clear that the "working elongation"
of
nylon is
up to 25%. Are you confusing "working elongation" with "destructive
deformation"?
Or perhaps you don't know the difference between nylon and polypropylene.

Are you really claiming the nylon 3-strand is destroyed when its
stretched
over 4%?
And you expect anyone to believe that you've ever been on a boat?



"JAXAshby" wrote in message
...
jeffies, go READ it again, this time let your wife explain it to you.

what did you say your degree was in again?


From: "Jeff Morris"
Date: 11/10/2004 8:53 AM Eastern Standard Time
Message-id:

You seem to be having serious comprehension problems, jaxie. Time for
another refill
of meds.

The chart in the New England Ropes brochure is quite clear, at least
for
anyone with a
4th grade education. They don't bother to mention elongation below 4%.
The
chart
shows "working elongation" of over 20% for filament nylon 3-strand.
The
terms
"destructive" and "deformation" are never mentioned.

There is some feeling that after a major stress, perhaps over 25% of
tensile
strength,
nylon rode should be replaced. This not a problem for a snubber, which
can
be
considered sacrificial. This makes a good case for downgrading a
primary
rode and
replacing it after a major blow.




"JAXAshby" wrote in message
...
jeffies, are you a lying sack of squat, or just too stupid to read
your
own
cites?

4%, dood, your cite states, just like I said. Unless, of course,
*you*
don't
know what destructive elongation is. What did you say your degree is
in?
we
would like to hear you say it again.

From: "Jeff Morris"
Date: 11/9/2004 8:35 PM Eastern Standard Time
Message-id:

Yet another topic where jaxie can show his ignorance. NE Ropes says
at
15%
of
breaking strength elongation is 15%. Marlow has similar numbers.
But
what
would
they know?
http://www.neropes.com/techdata/3strand.pdf

One can debate whether 15% of tensile strength is a proper safety
factor,
but
for a
snubber its not that critical. This works out to snubbers in the
range
of
30 to 60
feet. Personally, the need to rig snubbers was one of the issues
that
led
me
to stop
using all-chain and go to a mixed chain/nylon rode.


"JAXAshby" wrote in message
...
ten foot of stretch on standard twisted nylon is about 150' to
250'
of
nylon,
except under line breaking conditions.

From: "Jeff Morris"
Date: 11/7/2004 4:55 PM Eastern Standard Time
Message-id:

Even more important than the "droop" is the limited (almost
non-existent)
extension
available to an all chain system. What its really needed is
enough
nylon
to
allow for
5 or 10 feet, or more, of stretch.



"Jim Donohue" wrote in message
news:rUtjd.90348$bk1.52418@fed1read05 ...

"Amgine" wrote in message
om...
"Jim Donohue" wrote in message
news:X2Uid.82404$bk1.80735@fed1read05...
The problems is
that above 35 knots of wind or so you have a straight rode.

Uhm, maybe for your boat. In fact, just last weekend I was
anchored
out in 30 gusting 45 and neither chain+rope rode was bar-taut.
On
the
other hand, I was wishing I had a bit more chain on both
because
I
didn't have quite enough out for the weather (7:1 on a 7.5kg
Bruce,
and 5:1 on a 25lb. CQR) as I'd anchored 8 hours before the peak
of
the
blow.

To get a reasonable amount of shock absorption with all-chain,
use
a
chain hook on about 30-40' of light nylon laid line and veer
out
a
few
more feet of chain. You'll get all the spring you want, but if
there's
much fetch you don't want too slack a chain to save your bows
from
a
beating.

I've never used either a kellet or buoy, but I'd like to
experiment
with both. Who has used which?

Amgine
http://wiki.saewyc.net/

See Complete Book of Anchoring and Mooring by Hinz page 113. On
the
ABYC
hypothetical power boat of 45 feet and 15 foot beam the
cantenary
has
1
foot of
"droop"per 100 feet of rode at 30 knots and 0 feet at 40 knots.
If
your
boat is
smaller and has a smaller section it may be a little higher.

Hinz advocates the use of chain riding stoppers for all chain
boats.
He
points out
that all chain rodes are very good at parting or destroying
something
in
high winds.
They are also sufficiently noisey in high wind conditions to
make
sleep
difficult.

Jim Donohue

jeffies, you are unteachable.

anchor with clothesline, if you wish.

From: "Jeff Morris"
Date: 11/11/2004 8:54 AM Eastern Standard Time
Message-id:

So you're still insisting the 3-strand nylon is destroyed by stretching 4%?
Why do
you suppose NE Ropes describes it as having "high elongation" and has a chart
showing
"working elongation" of over 20%?

Don't be such a coward jaxie. Be a man and just admit you made a mistake.
Guess
that's too much of a stretch for you.


"JAXAshby" wrote in message
...
no, I am sick and tired of attempting communication with a blithering
idiot.
no effort on my part will ever help you understand even the most simple of
concepts, for for you to accept understanding with another's help clearly
shows
-- to you -- that you didn't understand even the simplest of concepts by
yourself.

you are unteachable, jeffies. you probably STILL don't realize that red
stop
lights are higher than green lights, and for sure when you do realize that
elemental fact you will have no idea why.

tie up with a clothesline, jeffies.

From: "Jeff Morris"
Date: 11/11/2004 8:36 AM Eastern Standard Time
Message-id:

In other words, you can't figure out the difference between nylon and
polypropylene.
Its a good thing you never go sailing.


"JAXAshby" wrote in message
...
jeffies, stay tied to the dock. again. you are lost to this universe.
still.
this subject is way beyond you. as always.

From: "Jeff Morris"
Date: 11/10/2004 9:45 PM Eastern Standard Time
Message-id:

I was right, you don't know the difference between nylon and
polypropylene.
Are you
really claiming nylon fails after stretching 4%? Why do you think NE
Ropes
says
nylon 3-strand has "high elongation"?

Here's the link again. Nylon 3-strand: 15% working elongation at 15%
tensile

strength. (OK, maybe 14%)
http://www.neropes.com/techdata/3strand.pdf

"JAXAshby" wrote in message
...
jeffies, go read the damned thing. then read it again, and again and
again.
then if you STILL don't understand what it says, go look at plaited
rope
vs
elongation, and THEN look at springy mountain climbing rope.

4 frickin' %, jeffies. get your wife to explain it to you.



From: "Jeff Morris"
Date: 11/10/2004 8:17 PM Eastern Standard Time
Message-id:

Read what, jaxie? The chart is very clear that the "working
elongation"
of
nylon is
up to 25%. Are you confusing "working elongation" with "destructive
deformation"?
Or perhaps you don't know the difference between nylon and
polypropylene.

Are you really claiming the nylon 3-strand is destroyed when its
stretched
over 4%?
And you expect anyone to believe that you've ever been on a boat?



"JAXAshby" wrote in message
...
jeffies, go READ it again, this time let your wife explain it to you.

what did you say your degree was in again?


From: "Jeff Morris"
Date: 11/10/2004 8:53 AM Eastern Standard Time
Message-id:

You seem to be having serious comprehension problems, jaxie. Time
for
another refill
of meds.

The chart in the New England Ropes brochure is quite clear, at least
for
anyone with a
4th grade education. They don't bother to mention elongation below
4%.
The
chart
shows "working elongation" of over 20% for filament nylon 3-strand.
The
terms
"destructive" and "deformation" are never mentioned.

There is some feeling that after a major stress, perhaps over 25% of
tensile
strength,
nylon rode should be replaced. This not a problem for a snubber,
which
can
be
considered sacrificial. This makes a good case for downgrading a
primary
rode and
replacing it after a major blow.




"JAXAshby" wrote in message
...
jeffies, are you a lying sack of squat, or just too stupid to read
your
own
cites?

4%, dood, your cite states, just like I said. Unless, of course,
*you*
don't
know what destructive elongation is. What did you say your degree
is
in?
we
would like to hear you say it again.

From: "Jeff Morris"
Date: 11/9/2004 8:35 PM Eastern Standard Time
Message-id:

Yet another topic where jaxie can show his ignorance. NE Ropes
says
at
15%
of
breaking strength elongation is 15%. Marlow has similar numbers.
But
what
would
they know?
http://www.neropes.com/techdata/3strand.pdf

One can debate whether 15% of tensile strength is a proper safety
factor,
but
for a
snubber its not that critical. This works out to snubbers in the
range
of
30 to 60
feet. Personally, the need to rig snubbers was one of the issues
that
led
me
to stop
using all-chain and go to a mixed chain/nylon rode.


"JAXAshby" wrote in message
news:20041109193940.07586.00000403@m b-m01.aol.com...
ten foot of stretch on standard twisted nylon is about 150' to
250'
of
nylon,
except under line breaking conditions.

From: "Jeff Morris"
Date: 11/7/2004 4:55 PM Eastern Standard Time
Message-id:

Even more important than the "droop" is the limited (almost
non-existent)
extension
available to an all chain system. What its really needed is
enough
nylon
to
allow for
5 or 10 feet, or more, of stretch.



"Jim Donohue" wrote in message
news:rUtjd.90348$bk1.52418@fed1read0 5...

"Amgine" wrote in message
om...
"Jim Donohue" wrote in message
news:X2Uid.82404$bk1.80735@fed1read05...
The problems is
that above 35 knots of wind or so you have a straight rode.

Uhm, maybe for your boat. In fact, just last weekend I was
anchored
out in 30 gusting 45 and neither chain+rope rode was
bar-taut.
On
the
other hand, I was wishing I had a bit more chain on both
because
I
didn't have quite enough out for the weather (7:1 on a 7.5kg
Bruce,
and 5:1 on a 25lb. CQR) as I'd anchored 8 hours before the
peak
of
the
blow.

To get a reasonable amount of shock absorption with
all-chain,
use
a
chain hook on about 30-40' of light nylon laid line and veer
out
a
few
more feet of chain. You'll get all the spring you want, but
if
there's
much fetch you don't want too slack a chain to save your bows
from
a
beating.

I've never used either a kellet or buoy, but I'd like to
experiment
with both. Who has used which?

Amgine
http://wiki.saewyc.net/

See Complete Book of Anchoring and Mooring by Hinz page 113.
On
the
ABYC
hypothetical power boat of 45 feet and 15 foot beam the
cantenary
has
1
foot of
"droop"per 100 feet of rode at 30 knots and 0 feet at 40
knots.
If
your
boat is
smaller and has a smaller section it may be a little higher.

Hinz advocates the use of chain riding stoppers for all chain
boats.
He
points out
that all chain rodes are very good at parting or destroying
something
in
high winds.
They are also sufficiently noisey in high wind conditions to
make
sleep
difficult.

Jim Donohue