About Us

Interesting words coming out of our mouth.

"JAXAshby" wrote in message
...
doug, knock it the frick off. you have not a frickin clew as to what is
going
on. keep your ignorant on this subject self quiet.

dougs, it is not hardly necessary for you to open your mouth on every
subject.

From: "Doug Dotson" AMcom
Date: 10/21/2004 6:16 PM Eastern Daylight Time
Message-id:

Sounds like you have the same genset that I do. I'll look into
the manual and let you know what I find. In any case, what
you describe sounds like an installation problem. The seven
cranks before the compression release closes should not
produce the problem you describe. Have you contacted
Entec? I had a problem with mine and they were very
halpful.

Doug
s/v Callista

"Jean-Marie" wrote in message
...

"Steve" wrote in
:

The reason I ask, I have had a problem with wet exhaust water getting
back into the cylinder on my Entec/Farymen gen set engine. This
happens when I have intial trouble getting it started and after I use
the compression release.

I do not know the answer to the compression lever, but when the engine
is
cranked and it does not start, the water accumulates in the exhaust
system.
There is no explosion to push it out and depending on how high it has to
go
it might as well come back into the engine.

I have seen suggested somewhere that you close the water intake if the
engine has to be cranked for a long time while it does not start or you
do
not want it to start (Winterizing).

Steve
s/v Good Intentions

JM

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Old diesel fuel - two questions	Al Gunther	Cruising	2	May 30th 04 01:15 PM
uk diesel costs	Ken Baker	Power Boat Racing	0	May 25th 04 02:41 PM
Why Ficht failed no1	K Smith	General	53	January 26th 04 07:46 PM
2003 GAULEY RIVER RELEASE INFORMATION	DL Luinstra	General	0	August 31st 03 06:48 PM
Diesel outboard?	Jack Rye	Cruising	4	August 28th 03 08:34 PM

Menu

About Us