Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
The wind direction sensor at the masthead is frozen--will not turn to
face the wind. I loosened the set screw and removed the wind "vane," and the rod it was attached to appears to be frozen--I think it should turn, but not sure. Are there schematics anywhere so I know how to take it apart/repair it? Any help would be appreciated. Thanks, Ron |
#2
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On 4/2/2011 3:06 PM, dweller wrote:
The wind direction sensor at the masthead is frozen--will not turn to face the wind. I loosened the set screw and removed the wind "vane," and the rod it was attached to appears to be frozen--I think it should turn, but not sure. Are there schematics anywhere so I know how to take it apart/repair it? Any help would be appreciated. Thanks, Ron Google remains your friend: Search on and you'll get a pdf return with the complete manual. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Autohelm ST50 Navcentre | Electronics | |||
WTB Autohelm Masthead wind transducer. | Marketplace | |||
Autohelm ST50 plus | Cruising | |||
Autohelm ST50 plus | Boat Building | |||
Output format from Autohelm ST50 masthead unit | Electronics |