| Home |
| Search |
| Today's Posts |
|
#19
posted to rec.boats.cruising
|
|||
|
|||
|
On Fri, 19 Jun 2009 10:44:37 -0700, "Capt. JG"
wrote: I might just try this (not single-handed the first time). Of course, it might make a mess with the mud. I guess I'm being picky. Rule makes a 3600 gpm bilge pump. I figure I could plumb one to a couple of transom nozzles and have a couple of miles worth of emergency propulsion for my 22 ft fish/ski. You also plumb it to a hose at the bow, to wash off the anchor and rode. I used to use a 20 pound or so Danforth with a fifty foot rode to anchor in 20 ft, mud bottom. I always buried it with the engine. Adequate for a 12 foot duckboat. Also used it with a jet runabout. No cleats, you tied to to the lifting eye, there were chocks. Same line also served as the dock line. One foot of 3/8 line per year, for two boats. Cheap. Casady |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Single handing and watch keeping | Cruising | |||
| I still prefer single handing | ASA | |||
| Single blister | Boat Building | |||
| land anchor vs fluke anchor for anchors set directly on beach | Cruising | |||