Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Fri, 19 Jun 2009 20:51:13 +0200, "Edgar"
wrote: "Bruce In Bangkok" wrote in message .. . I would say that with the exception of an occasional manual windless they are all equipped with electric anchor windless and probably 90%+ are using all chain rode and fairly heavy anchors. My own 40 ft sloop displaces about 13 tons and has 45 lb. and 60 lb. CQR anchors and 200 ft. of 5/16 inch chain. If I were making off shore voyages I would carry an additional 100 mtrs of 1 inch nylon rode for a total of 528 feet. Probably fairly typical of the anchoring equipment you see here. Just for information (and I don't recommend it) I did make a trip down to Malaysia and back with an inoperative anchor windless and hauled the anchor once a day by hand, for six days. I would suggest that your proposed 1" rode would be somewhat of an overkill. Although the possibility of chafe is a factor the breaking strain of your 5/16 chain is about 3 tons, while the breaking strain of 1" dia nylon is about 10 tons. Certainly you must consider safety factors and the question of chafe on the nylon but I would suggest 14mm nylon instead , which would allow you to stow a longer length of it. It probably is overkill. On the other hand I got it cheap. A chap ordered a spool of 1 inch and after it arrived decided that he really didn't need all that rope so gave me 100 M. It fitted, carefully packed, in one locker under the vee birth; I spliced a thimble in the end and decided that it was an emergency mooring/anchor line. Cheers, Bruce (bruceinbangkokatgmaildotcom) |
#2
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() "Bruce In Bangkok" wrote in message ... On Fri, 19 Jun 2009 20:51:13 +0200, "Edgar" wrote: I would suggest that your proposed 1" rode would be somewhat of an overkill. Although the possibility of chafe is a factor the breaking strain of your 5/16 chain is about 3 tons, while the breaking strain of 1" dia nylon is about 10 tons. Certainly you must consider safety factors and the question of chafe on the nylon but I would suggest 14mm nylon instead , which would allow you to stow a longer length of it. It probably is overkill. On the other hand I got it cheap. A chap ordered a spool of 1 inch and after it arrived decided that he really didn't need all that rope so gave me 100 M. It fitted, carefully packed, in one locker under the vee birth; I spliced a thimble in the end and decided that it was an emergency mooring/anchor line. Yes, can't argue with that! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Single handing and watch keeping | Cruising | |||
I still prefer single handing | ASA | |||
Single blister | Boat Building | |||
land anchor vs fluke anchor for anchors set directly on beach | Cruising |