Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Byron Creek
 
Posts: n/a
Default Question for Peggie

Hi Peggie,

Here in Australia (Sydney Harbour especially), authorities are starting to
get serious about toilet discharge. Few people actually have holding tanks
fitted as yet, a blind eye seems to be turned to it at the moment!

I've come up with a holding tank setup which I think would be suitable for
my boat and would greatly appreciate your comments before I go
buying/setting up anything.

Boat is a Compass 29 foot sailboat, heavy full keeler.
From your online article, I know you prefer under the v berth for tank
location but this prime real estate is my sail locker! Also this location
places tank slightly above toilet level.

I do have a long, deep and wide bilge running the full length of the main
cabin.
This could easily fit a tank 4ft x 1ft x 1ft, still leaving room for bilge
pumps and bilge water. Forward end of the tank would be just aft of toilet
which is just forward of mast, port side. This places the top of tank about
a foot below the bottom of the toilet pump. This also means tank is
perfectly amidships.

One concern with this setup is that the vent hose would be about 8 feet long
if lead to the point of the bow. Maybe this could be helped by an extra vent
hose leading to the stern for good air flow? Fitting big one and a half inch
vent hoses would be no problem. Deck discharge hose would be about 6-7 foot
long. Is this too long?

Apart from that, I want the system set up as a three way system.
1. discharge to tank for later pumpout
2. discharge to tank for later overboard dumping
3. discharge directly overboard

Thanks for reading all this :-)

Darren
S/V Augustan
Sydney Harbour, Australia



  #2   Report Post  
Peggie Hall
 
Posts: n/a
Default Question for Peggie

Byron, I replied to this the first time you asked it.

Peggie

Byron Creek wrote:
Hi Peggie,

Here in Australia (Sydney Harbour especially), authorities are starting to
get serious about toilet discharge. Few people actually have holding tanks
fitted as yet, a blind eye seems to be turned to it at the moment!

I've come up with a holding tank setup which I think would be suitable for
my boat and would greatly appreciate your comments before I go
buying/setting up anything.

Boat is a Compass 29 foot sailboat, heavy full keeler.
From your online article, I know you prefer under the v berth for tank
location but this prime real estate is my sail locker! Also this location
places tank slightly above toilet level.

I do have a long, deep and wide bilge running the full length of the main
cabin.
This could easily fit a tank 4ft x 1ft x 1ft, still leaving room for bilge
pumps and bilge water. Forward end of the tank would be just aft of toilet
which is just forward of mast, port side. This places the top of tank about
a foot below the bottom of the toilet pump. This also means tank is
perfectly amidships.

One concern with this setup is that the vent hose would be about 8 feet long
if lead to the point of the bow. Maybe this could be helped by an extra vent
hose leading to the stern for good air flow? Fitting big one and a half inch
vent hoses would be no problem. Deck discharge hose would be about 6-7 foot
long. Is this too long?

Apart from that, I want the system set up as a three way system.
1. discharge to tank for later pumpout
2. discharge to tank for later overboard dumping
3. discharge directly overboard

Thanks for reading all this :-)

Darren
S/V Augustan
Sydney Harbour, Australia





--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://69.20.93.241/store/customer/p...40&cat=&page=1
http://shop.sailboatowners.com/detai...=400&group=327

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mercury Mark 58,piston question Clams Canino General 1 May 2nd 04 08:58 PM
Another strip-plank question - a bit long Pete Boat Building 3 January 12th 04 08:03 PM
Winterizing question plus. rock_doctor General 3 October 19th 03 02:24 AM
Exhaust question on inboard 1958 Chris Craft Gary Warner General 5 September 25th 03 12:32 AM
Transom Height - Dumb Question Alert Michael Gagliardi General 0 August 28th 03 07:31 PM


All times are GMT +1. The time now is 08:03 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017