Home |
Search |
Today's Posts |
#28
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Thu, 12 Feb 2009 10:26:54 -0800 (PST), Two meter troll
wrote: Your neighbor's roof wasn't immersed in salt water very often either. I doubt very much if galvanized wire will make a *satisfactory anchor rode as I can't see how you can wash all the salt out *of the stands so it will be rusting quietly away while on the drum. Casady Cheers, It makes a fine rode. jiminy what do folks think work boats carry? we dont have ss anchor's or rodes. the cost is prohibitive and the life span is not as good. SS does not like to work. the only advantage SS has over good galv is that it is not supposed to rust Ever (if you get the wrong formulation it sure will). that still does not off set the cost diffrance. SS is mostly Cash flash there are other things that work as well or better and are cheaper to boot. I must say that I have never seen a work boat with a cable anchor rode so I can't comment other then the "well, it seems likely" argument that is so frequently totally incorrect. I have seen mooring lines, normally used on larger ships, that are galvanized but aren't intended to be dunked in the ocean on a daily basis. Cheers, Bruce |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
stainless rigging wire - nick in wire | Cruising | |||
Wire Rigging for Ships | ASA | |||
Day Sailer One Mainsheet rigging, Halyards and Vang rigging | ASA | |||
Johnson 3 wire trim motor.. Red, Blue, green.. How to wire up? | General | |||
Reusable rigging wire terminals besides Stalok, Norseman? | Cruising |