[Roger Long]

I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? I've worked with some other fake woods and they are pretty ornery in
this regard.

--
Roger Long

[[email protected]]

On Sun, 16 Nov 2008 07:02:51 -0500, "Roger Long"
wrote:

I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? I've worked with some other fake woods and they are pretty ornery in
this regard.

I use regular woodworking tools on Starboard. High speed tends to melt
it, but otherwise it's very easy to work. Rather then chisels and
such, you would be better off with a rotozip or die grinder with
various attachments, such as a small drum sander and a side cutting
drill bit.

I don't have A/C on my boat so I bought an inexpensive Ryobi rotary
tool at Home Depot that has proven very handy on the boat. Takes all
the standard dremel and roto zip bits. The EZ metal cutoff wheel has
been very handy and effective for flush cutting excess length from
bolts.

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100007658&N=10000003+9 0401+502400


I have a bunch of Ryobi 18 volt tools, so I already had the batteries
for it. Ryobi tools are inexpensive, work well and they all take the
universal "one fit" 18 volt battery.

[cavelamb himself[_4_]]

wrote:

On Sun, 16 Nov 2008 07:02:51 -0500, "Roger Long"
wrote:


I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? I've worked with some other fake woods and they are pretty ornery in
this regard.


I use regular woodworking tools on Starboard. High speed tends to melt
it, but otherwise it's very easy to work. Rather then chisels and
such, you would be better off with a rotozip or die grinder with
various attachments, such as a small drum sander and a side cutting
drill bit.

I don't have A/C on my boat so I bought an inexpensive Ryobi rotary
tool at Home Depot that has proven very handy on the boat. Takes all
the standard dremel and roto zip bits. The EZ metal cutoff wheel has
been very handy and effective for flush cutting excess length from
bolts.

http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100007658&N=10000003+9 0401+502400


I have a bunch of Ryobi 18 volt tools, so I already had the batteries
for it. Ryobi tools are inexpensive, work well and they all take the
universal "one fit" 18 volt battery.



Aw Dog, you put me to shame here.
I'm still lost is 12 volt land.


I'll upgrade - some day...
--

Richard

(remove the X to email)

[Garland Gray]

Can't say much about hand tools, but I've dressed the edges of Starboard
with a shaper, and it gave a real smooth cut.
I guess you are aware of Starboard's high coefficient of thermal expansion.
You also need special glue, otherwise, mechanical fasteners.

"Roger Long" wrote in message
...
I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? I've worked with some other fake woods and they are pretty ornery
in this regard.

--
Roger Long

[Jere Lull]

On 2008-11-16 07:02:51 -0500, "Roger Long" said:

I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? I've worked with some other fake woods and they are pretty ornery in
this regard.

I think SaltyDog covered the "working" aspects of it, but I wonder
about the longevity of the stuff. It's soft and I expect likely to
discolor fairly quickly if it's left in the sun, subject to the harsh
chemicals of cleaning, abuse of scrubbing....

--
Jere Lull
Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD
Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/
Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/

[Capt.Bill]

On Nov 16, 2:07*pm, Jere Lull wrote:
On 2008-11-16 07:02:51 -0500, "Roger Long" said:

I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? *I've worked with some other fake woods and they are pretty ornery in
this regard.

I think SaltyDog covered the "working" aspects of it, but I wonder
about the longevity of the stuff. It's soft and I expect likely to
discolor fairly quickly if it's left in the sun, subject to the harsh
chemicals of cleaning, abuse of scrubbing....

--
Jere Lull
Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD
Xan's pages:http://web.mac.com/jerelull/iWeb/Xan/
Our BVI trips & tips:http://homepage.mac.com/jerelull/BVI/

It doesn't discolor in the sun. And it doesn't seem to be effected by
most common cleaners.

"King StarBoard® is known for its ability to endure the constant
punishment of the sun, water and weather in harsh marine environments.
It won’t rot, warp, discolor or delaminate and it never needs painting
or refinishing. This makes it a smarter option than wood, wood
laminates and ordinary plastic. King StarBoard maintains its shape,
color and finish for a lifetime of worry-free use. Cleanup is a snap
with common household cleaners."


Capt. Bill

[[email protected]]

On Sun, 16 Nov 2008 19:07:07 GMT, Jere Lull wrote:

On 2008-11-16 07:02:51 -0500, "Roger Long" said:

I need to make a hatch frame that involves some complex curved rabbets and
am thinking of using Star Board so as not to wind up with more wood trim
that needs re-finishing.

How easily does Star Board work with a chisel, planes, and similar hand
tools? I've worked with some other fake woods and they are pretty ornery in
this regard.

I think SaltyDog covered the "working" aspects of it, but I wonder
about the longevity of the stuff. It's soft and I expect likely to
discolor fairly quickly if it's left in the sun, subject to the harsh
chemicals of cleaning, abuse of scrubbing....

Nope. I've used it for a number of things, including the mounting pad
for my outboard bracket, and after 5 years, that pad still llooks
exactly like the day I installed it. It's not all that soft. It's very
similar to the HDPE used for commercial kitchen cutting boards, except
it has been UV stabilized.

[Wayne.B]

On Sun, 16 Nov 2008 18:10:05 -0500, wrote:

Nope. I've used it for a number of things, including the mounting pad
for my outboard bracket, and after 5 years, that pad still llooks
exactly like the day I installed it. It's not all that soft. It's very
similar to the HDPE used for commercial kitchen cutting boards, except
it has been UV stabilized.

Can you get it at Home Depot or Lowes? If not, what's a good source?

As an FYI, it is very easy to run 110 volt tools onboard using an
inexpensive inverter.

[Good Solder Schweik]

On Mon, 17 Nov 2008 08:34:40 -0500, wrote:

On Sun, 16 Nov 2008 21:41:49 -0500, Wayne.B
wrote:

On Sun, 16 Nov 2008 18:10:05 -0500, wrote:

Nope. I've used it for a number of things, including the mounting pad
for my outboard bracket, and after 5 years, that pad still llooks
exactly like the day I installed it. It's not all that soft. It's very
similar to the HDPE used for commercial kitchen cutting boards, except
it has been UV stabilized.

Can you get it at Home Depot or Lowes? If not, what's a good source?

As an FYI, it is very easy to run 110 volt tools onboard using an
inexpensive inverter.

What a piker! Corded power tools are a decided disadvantage on a boat.
Go climb the mast dragging an extension cord and 110 volt drill in the
rain and get back to us, Mr. Experience!


Try drilling a half inch hole in a piece of 1/4 inch stainless on the
mast head fitting with your puny little battery drill. you'll
understand why the A.C. equipment is needed.

Cheers,

Schwiek
(goodsoldierschweikatgmaildotcom)

[Edgar]

"Good Solder Schweik" wrote in message
...
Try drilling a half inch hole in a piece of 1/4 inch stainless on the
mast head fitting with your puny little battery drill. you'll
understand why the A.C. equipment is needed.

I needed to drill a 1/4 hole in a thick stainless bracket on deck so I could
fix a shackle for the end of a jackstay.
I blunted three HSS drills without making much impression at all so went to
a really good tool shop they have here and explained the problem.
They sold me a cobalt steel drill especially intended for stainless and it
went through the stuff as if it was not there, producing long unbroken
strands of swarf that looked like springs.
It was a very expensive drill but the job was done in a few minutes and the
cost of several ordinary drills and lots of my time saved was worth it.
After the job was finished the cobalt steel drill still looked and felt so
sharp that it might have been new.