Home |
Search |
Today's Posts |
#11
![]()
posted to rec.boats.building
|
|||
|
|||
![]() "Richard Casady" wrote in message ... On Mon, 07 Jan 2008 04:52:02 GMT, "Island Teak" wrote: Any teak deck that requires replacing has probably had that 1/4" worn off in service. Every cruise ship I have been on had teak decks. They didn't maintain them, hosed them down, perhaps, and I don't know why they would wear much if any. Traffic wouldn't do it, those things are big and the wear would be well diluted. The planks were perhaps three inches wide, and must have been maybe 3/4 inch thick? You need a certain thickness, relative to width, to avoid cupping. Of course they don't have to impress the neighbors with well sanded teak. I mean we saw one boxboat in two atlantic crossings. Casady And your point is ? I have been through a number of cruise ships at the 'ship breaking yards' and , over years, watched teak deteriorate on the stump. Do you believe that teak decking does not wear thin ? regards...Ken |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cleaning teak decks. | General | |||
Teak Decks | Boat Building | |||
Removal of teak decks | General | |||
Teak Decks on a Passport | Cruising | |||
Refinishing interior teak decks | Boat Building |