About Us

dazed and confuzzed

wrote:

On Fri, 12 Oct 2007 20:39:24 -0700, "Lew Hodgett"
wrote:

"Alex" wrote:

At the risk of (1) being exposed as a boatbuilding dunce or (2) even
worse, starting a thread as hotly contested as the hypotheteical 40'
vertical sal****er still, the comment about Dow Corning 795 leads me to
ask a (naive) question.

Could this high-strength, high-grab, somewhat flexible adhesive, or one
somewhat similar, be used to build a boat from aluminum panels, somewhat
the way epoxy is used for stitch-and-glue with plywood?

I realize there would have to be a lot of modifications to the
construction process. But is the concept reasonable with today's
adhesives? Certainly DC 795 seems to have no trouble bonding to aluminum.

(Dow says 795 is not for use on surfaces continuously under water, so that
would be a problem for anything except trailered boats or dinghy-type
uses. But again, I'm just raising the question, not proposing it as a real
option. And there may be other adhesives that would be OK for underwater
applications.)

You might want to contact SikaFlex tech service (Metro Detroit) and ask some
of these questions.

Lew

Years ago I read an article about a British engineering student who
built a race car as his "Theses". He wanted the body to fail
progressively and ended up gluing the aluminum body panels together
using an adhesive made by locktite. You might have a look at their
literature.

Bruce in Bangkok
(brucepaigeATgmailDOTcom)

Loctite (now owned by another company)U-05FL 2 part urethane.. Great
bond to aluminum (with proper prep).

There is another guy I know of using methacrylate for the same concept.

You have to use rivets to hold the large panels in place until it cures
and to provide shear strength.

At the rate I am building mine, I'll be done in another year or so and
let you know how it works then. So far, it works well. The only issue is
the pot time, but that can be overcome with a bit of planning and some
help from friends.

--
“TANSTAAFL”

__________________________________________________ __________________________

But - there is a point where criticism, even offered in the guise of
love, moves past the point of correction and to the point of
destruction. It's a subtle line, but it exists.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
prop to rebuild? or not to rebuild?	Tim	General	9	June 23rd 07 05:25 PM
Through hull bedding	Roger Long	Cruising	4	March 26th 06 03:49 AM
Re-bedding a genoa track	engsol	Cruising	8	April 13th 05 02:11 AM
Bedding deck fittings.	Doug Dotson	Cruising	15	June 10th 04 02:39 AM
Bedding windows	Bryan B	Boat Building	10	October 23rd 03 01:22 AM

Menu

About Us