Home |
Search |
Today's Posts |
#20
posted to rec.boats.building
|
|||
|
|||
Marine Plywood?
On Oct 27, 11:35 am, salmobytes wrote:
..........and even then I was talking about hulls made with plywood that is skinned on *both* sides with fiberglass. Hull that have fiberglass on the outside and a paint or oil finish inside can more easily dry out. I've seen driftboats--with 'encapsulated' epoxy fiberglass bottoms--so saturated with water their weight was almost double. If you do build that way you have to keep up with the repairs, adn patch dinged fiberglass almost right away (not all that hard to do, but you must do it). Or you can build with honeycomb core. It's bullet proof and fool proof, almost. You can pre-fiberglass honeycomb core while it's still flat, on top of visqueen covered saw horses, and then treat it like plywood. The encapsulation is the problem. Once water gets in, and it will, it can't get out. The best way to handle plywood in my opinion is with paint which is more easily repaired, and allows for some breathing. I have some plywood boats over a decade old that are fine. One in particular, a Payson Skimmer has a glass sheathing on the bottom, but the inside of the ply is paint. I know that about a hundred folks will come in and slam me here, like every other time I say eposy is not waterproof in practice, even if it is in theory so I will not argue. I have built over 60 plywood boats in my life... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Birch Multi-layerr plywood versus Marine Plywood | Boat Building | |||
Marine plywood source | Boat Building | |||
finding marine plywood | Boat Building | |||
Marine Plywood or plywood for marine uses + links and images | Cruising | |||
Marine Plywood Suppliers in Atlanta | Boat Building |