ashore wrote:

Folks, WRT that 35-year-old sweetheart that some of you were kind
enough to post responses, I'm now considering re-gelling. The yard
folks tell me that 2-part LP application has gotten so expensive that
re-gelling hulls from the rail to somewhere below the waterline is a
reasonable consideration. I'm expecting quotes from the same guy on
both.

Any experience here? There's two good coats of epoxy primer in both
approaches, but are there any other things to watch for? Thanks all,

AS
Annapolis, MD



------------------

gel coat is just thickened polyester resin.... some stuff the rest of
the boat is made from.
Generally epoxy bonds to polyester resin but polyester resin doesn't
usually stick well to epoxy - and epoxy primers are just solvent thinned
epoxy.

LP coatings can be had for about $100 per gallon - same as bottom
paint. Of course you can buy the big name and pay $300 per gallon if
you like!


LPU coatings are not very user friendly during application. Another
option is a good 1 part enamel then an LPU clear coat on top. The
clear LPU may not show the 'mistakes' that a pigmented lpu would.


Note that lpu coatings come as polyester polyurethanes and acrylic
polyurethanes. Google LPU to learn more about this type of coatings....

paul oman'
progressive epoxy polymers.