About Us

Bruce

On Sat, 02 Jun 2007 18:13:53 -0700,
wrote:

On May 31, 11:12 pm, Bruce wrote:

I suggest that you have a look athttp://continuouswave.com/whaler/reference/13/
Much better information about the Whaler 13.

Down toward the bottom of the page there is a picture of a whaler with
the stern cut off to show the construction which appears to be
essentially a foam boat with inner and outer skins.

First of all I think you are starting on a much more complicated job
then you realize but having said that here is the way I'd do it.

I have built, lofted and spiled a few wood and wood and glass boats, I
don't think to much of it will surprise me labor wise, I am pretty
good with epoxy and glass, and I have plenty of time to do the
project.
Snipped a bunch

I had sort of assumed from your question that you had not built a lot
=:-{

If you have any software for boat design (something like HULLS) it is
easy to design a new hull and develop offsets. With that you should be
able to loft the hull so it would be easy to come up with a whaler
look alike.

Just casual looking at a Whaler it looks as though one could build it
out of plywood or perhaps use just a bit of foam if the ply got too
tortured but essentially I suspect that you could build it as a
plywood boat rancher then a foam/ply boat and depending on the
thickness of the ply you probably wouldn't need very thick glass. But
if you are covering foam try to use a bit thicker because it really
doesn't stand up to punctures very well.

Bruce in Bangkok
(brucepaigeatgmaildotcom)

--
Posted via a free Usenet account from http://www.teranews.com

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O/T Advice to Young Men from an Old Man	jlrogers	ASA	1	March 17th 07 02:31 AM
Norwegian "sjekte" wooden boat advice requested	markeike	Boat Building	1	July 24th 05 08:19 PM
ON Topic -- Power boat novice seeks advice	Jim	General	31	April 15th 04 02:22 AM
Looking for wood laminate	Sherwin Dubren	Cruising	4	January 2nd 04 02:02 AM
Sage restoration advice wanted (osmosis)	Angus Gratton	General	4	November 14th 03 06:04 PM

Menu

About Us