| Home |
| Search |
| Today's Posts |
|
#21
posted to rec.boats.building,uk.rec.waterways,uk.rec.waterways.fens
|
|||
|
|||
|
What kind of coupling joint does the Centaflex use? Here are 2 pics http://www.luxe-motor-kei.co.uk/inte...e/image47.html http://www.luxe-motor-kei.co.uk/inte...e/image48.html |
|
#22
posted to rec.boats.building,uk.rec.waterways,uk.rec.waterways.fens
|
|||
|
|||
|
Adrian Smith wrote:
"Adrian Smith" wrote in message . uk... I posted this to a number of groups as I'm sure it's of interest to all. I'm looking to purchase a CV coupling to go between the engine and the prop shaft. The two contenders seem to be either an Aquadrive or a PythonDrive. The PythonDrive is cheaper. Has anyone any experience with the PythonDrive. Will it handle movement from a soft mounted engine in up/ down, side/ side and fore/ aft directions. My engine is currently coupled to the prop shaft with a R&D flexible shaft coupling, this is basically a plastic plate that can flex slightly. Although the setup works, it's a bit primitive. At certain throttle settings the engine bounces about a bit and vibrations can be felt. Any info will be appreciated. Adrian Smith Guys, thanks for all your help. I'll post here with what I decide to do and the results for others to benefit from. Adrian Smith US prices range from $900 to 9500. See US distributor: http://www.pyiinc.com/index.php?acti...section=python I was planning to go that route, but thanks to this thread I'm pretty sure I'll go with Centra. Brian C (for direct reply add an ell after the c) |
|
#23
posted to rec.boats.building,uk.rec.waterways,uk.rec.waterways.fens
|
|||
|
|||
|
"CS" wrote in message ups.com... What kind of coupling joint does the Centaflex use? Here are 2 pics http://www.luxe-motor-kei.co.uk/inte...e/image47.html http://www.luxe-motor-kei.co.uk/inte...e/image48.html I had overlooked the fact that you have a relatively long shaft between two Centaflex couplings. If my engine was further away from the stern I would be tempted to do the same. After much thought I am going to fit the PythonDrive P60K 372GBP. Thanks for supplying the pics, I read your website with great interest:-) Adrian Smith |
|
#24
posted to rec.boats.building,uk.rec.waterways,uk.rec.waterways.fens
|
|||
|
|||
|
On 12 Sep 2006 13:55:19 -0700, "CS" wrote:
What kind of coupling joint does the Centaflex use? Here are 2 pics http://www.luxe-motor-kei.co.uk/inte...e/image47.html http://www.luxe-motor-kei.co.uk/inte...e/image48.html Holy cow! Brian Whatcott Altus OK |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| SKF OK 90 coupling | Cruising | |||
| Drive Saver/Spacer users sought | Cruising | |||
| engine alignment | Cruising | |||
| Coupling for split Rudder Post | Boat Building | |||
| "get home" electric motor coupling to prop shaft? | Electronics | |||