Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
Glenn Ashmore wrote:
"Kurt Krueger" wrote How about throwing in some dry ice to displace the vapors? I'm not sure which is heavier but I suspect the gasoline would be heavier so it might get trapped under the CO2. Then when the CO2 disburses the gas vapor will still be there. The gasoline should be heavier (with gases, it is easy - it is all based on the molecular weight), but even if some gasoline vapors are still in there, there won't be any air. And all of this presumes that there is absolutely no turbulence during the sublimation of the dry ice, so that there is no mixing. Not very likely. At something like 12 cubic feet of CO2 for each pound of dry ice, a few pounds of dry ice should provide several tank volumes of CO2, which would sweep most of the air and gasoline vapors out of the tank, leaving behind an inert gas filling. bob |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
how do you pump out the holding tank? | Cruising | |||
Yacht water storage links -Mic | Cruising | |||
Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. | General | |||
Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. | Boat Building | |||
Fuel transfer/polishing pump | Cruising |