Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
Cruise 'n Carry parts
I have an old Cruise 'n Carry 2.75HP motor that I use on a canoe. It is
nice in that it weighs about 18lbs and runs for about 2 hrs on a 1 qt tank. I think it'll run forever. The fuel valve has given up the ghost. It has a 1/2" inlet and an 1/8" outlet barb and turns 90 degrees, gravity/suction feed only, no pump. It also has a micro-mesh screen/filter on the inlet (which by design sticks up into the tank.) I have checked all the normal suspects and come up empty handed. I'll probably get a section of 1/2" tube, a 1/2" inlet valve, and whatever reducers I need to get down to a 1/8" barb. I haven't quite figured out a hack for the filter yet. I thought I'd ask here before I go to the auto parts store and start piecing things together... Anyone know of a dead CNC 6700 anywhere? A valve which matches my attempted description? Any help appreciated. (Even the inevitable, "buy a new motor". grin) Ed -- When replying via email, replace spam with speak in the address. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: 1954 Chris Craft 30' Cabin Cruiser (Whole or Parts) in Beaufort, SC | Boat Building | |||
FS: 1954 Chris Craft 30' Cabin Cruiser (Whole or Parts) in Beaufort, SC | General | |||
1979 Johnson 70 hp parts | General | |||
parts / parts drawings for Honda 130?? | General | |||
FS: Yanmar 6LP parts in Tampa, Florida | Marketplace |