Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
"David" wrote in message
... Is it sound to use chop strand sheet cut to 10cm wide to use instead of fibreglass tape in a 12 ft Dinghy - will be powered by 2.5 hp outboard or electric trolling motor, i have used this on a canoe which is holding up well after 2 years of use??? i was planning to cover the whole interior with the stuff anyway. If this is chopped strand sheet to be used with polyester: do not use it. First: it can only be used with polyester because the strands are coated and "glued" together with some subtance to improve bonding to polyester but it prevents bonding with epoxy. Second: you cannot glue this stranded sheet to wood with polyester. You can peel it off very easily. And the whole idea of stitch and glue it that you glue the wood together with glass tape and epoxy. Meindert |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Question about stitch and glue | Boat Building | |||
Big stitch and glue boats... | Boat Building | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Glue & Stitch plans | Boat Building | |||
rec.boats.paddle sea kayaking FAQ | General |