Just a tip. Anything that can be cut or left a little big and will not
be a problem shaping later, should be left as so. If you make all the
edges finish and tight, you will end up having to knock it down more
than the plan calls for later after turning and working around the
boat. I always leave ends long, edges unfinished etc, wait till you
are ready for finish, before you finish. Impatience and the will to
see something look like a beautiful boat will only cause anguish
later. I always tell folks, "yes, I am builing your boat, but you
don't want to see her now". Wait till she looks like a boat!
Scotty from SmallBoats.com