Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Rick
 
Posts: n/a
Default microwave linseed oil

Max Camirand wrote:
Try putting an AOL CD in an old microwave. Light show!


It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.

RicK

  #2   Report Post  
Brian Nystrom
 
Posts: n/a
Default microwave linseed oil

Rick wrote:
Max Camirand wrote:

Try putting an AOL CD in an old microwave. Light show!



It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.


This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.

  #3   Report Post  
Rick
 
Posts: n/a
Default microwave linseed oil

Brian Nystrom wrote:

This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.


Which is precisely the point I was trying to make in my first post on
the subject.

Rick

  #4   Report Post  
Meindert Sprang
 
Posts: n/a
Default microwave linseed oil

"Brian Nystrom" wrote in message
...
Rick wrote:
Max Camirand wrote:

Try putting an AOL CD in an old microwave. Light show!



It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.


This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.


Except when the length of the spoon is exactly a half wavelength of
2.45GHz....

Meindert


  #5   Report Post  
dazed and confuzed
 
Posts: n/a
Default microwave linseed oil

Brian Nystrom wrote:
Rick wrote:

Max Camirand wrote:

Try putting an AOL CD in an old microwave. Light show!




It really is fantastic! I am tempted to put a switch on the light so
that it shows up better! Steel wool is also pretty good.



This only occurs with very thin coatings or slivers of metal. Placing a
metal spoon or pan in a microwave will have no effect.

it does in my microwave

--
Life is NOT a dress rehearsal.



  #6   Report Post  
Brian Nystrom
 
Posts: n/a
Default microwave linseed oil



dazed and confuzed wrote:
Brian Nystrom wrote:


This only occurs with very thin coatings or slivers of metal. Placing
a metal spoon or pan in a microwave will have no effect.

it does in my microwave


Does what?

  #7   Report Post  
dazed and confuzed
 
Posts: n/a
Default microwave linseed oil

Brian Nystrom wrote:


dazed and confuzed wrote:

Brian Nystrom wrote:



This only occurs with very thin coatings or slivers of metal. Placing
a metal spoon or pan in a microwave will have no effect.

it does in my microwave



Does what?

make sparks. from forks and spoons.

--
Life is NOT a dress rehearsal.

  #8   Report Post  
Backyard Renegade
 
Posts: n/a
Default microwave linseed oil

Brian Nystrom wrote in message ...
dazed and confuzed wrote:
Brian Nystrom wrote:


This only occurs with very thin coatings or slivers of metal. Placing
a metal spoon or pan in a microwave will have no effect.

it does in my microwave


Does what?


Sounds like some of you are questioning us that have actually put pans
or spoons in microwaves. Rick, Brian, the rest, I have personally put
metal objects in microwaves by accident and on purpose and they
sparked and crackled. May be that technology has changed, or maybe you
have not done it but you can. Do a little experiment with mom's micro
and set a spoon or pan in and cook on high for a couple of minutes and
tell us of the real time results as opposed to these off handed
slights of our experiences? That would probably clear things up at
least for now. I will trust you, if you say nothing happened so be it,
I will know that technology has changed since the early 80's when I
sold the TI products.
Scotty
  #9   Report Post  
Brian Nystrom
 
Posts: n/a
Default microwave linseed oil



Backyard Renegade wrote:

Sounds like some of you are questioning us that have actually put pans
or spoons in microwaves. Rick, Brian, the rest, I have personally put
metal objects in microwaves by accident and on purpose and they
sparked and crackled. May be that technology has changed, or maybe you
have not done it but you can. Do a little experiment with mom's micro
and set a spoon or pan in and cook on high for a couple of minutes and
tell us of the real time results as opposed to these off handed
slights of our experiences? That would probably clear things up at
least for now. I will trust you, if you say nothing happened so be it,
I will know that technology has changed since the early 80's when I
sold the TI products.
Scotty


I put metal utensils in the microwave all the time and it causes no
problems. The oven in question was purchased in the early 90's. Aluminum
foil is also no problem. Staples, twist ties and such will cause sparks
and fires, as I've accidentally discovered on a few occasions.

  #10   Report Post  
steveJ
 
Posts: n/a
Default microwave linseed oil

I know a woman who put her cordless phone in the microwave and
accidently cooked it. Not sure if it sparked or not. I believe it
somehow effected her husband's boatbuilding activities though.

Backyard Renegade wrote:
Brian Nystrom wrote in message ...

dazed and confuzed wrote:

Brian Nystrom wrote:




This only occurs with very thin coatings or slivers of metal. Placing
a metal spoon or pan in a microwave will have no effect.


it does in my microwave


Does what?



Sounds like some of you are questioning us that have actually put pans
or spoons in microwaves. Rick, Brian, the rest, I have personally put
metal objects in microwaves by accident and on purpose and they
sparked and crackled. May be that technology has changed, or maybe you
have not done it but you can. Do a little experiment with mom's micro
and set a spoon or pan in and cook on high for a couple of minutes and
tell us of the real time results as opposed to these off handed
slights of our experiences? That would probably clear things up at
least for now. I will trust you, if you say nothing happened so be it,
I will know that technology has changed since the early 80's when I
sold the TI products.
Scotty




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
opinions sought for full-time cruiser Tools and Spares selection Skip Gundlach Boat Building 32 February 9th 04 10:56 PM
How to Remove Too-Thick Linseed Oil Dan Boat Building 2 July 10th 03 10:21 PM


All times are GMT +1. The time now is 11:20 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017