| Home |
| Search |
| Today's Posts |
|
#26
posted to rec.boats.building
|
|||
|
|||
Keel cooler cast into lead
Oops! Acid flux depends on being washed off after soldering. Might this be
a problem? Roger http://home.insightbb.com/~derbyrm "Glenn Ashmore" wrote in message news:mUiQf.497330$0l5.326643@dukeread06... snip With my small diameter tube I am not to worried about the bond but I will sand blast the whole bolt frame/condenser assembly and paint the tubing with an acid flux formulated for tinning copper pots. I found that the copper/nickel wets out much better with it than regular acid solder flux. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| I'm ba aaaack! | ASA | |||
| Keel bolt material | Boat Building | |||
| Any thoughts onhow to make this boat better | ASA | |||
| Robbie's false PHRF rating! Too low! | ASA | |||
| where2 get cheap sounding lead ? | Cruising | |||
Threaded Mode
