Home |
Search |
Today's Posts |
#11
|
|||
|
|||
Epoxy or Poly for poly repairs?
I watched a video on boat repair recently in which polyester and gelcoat
were used to repair a crack in a polyester boat below the waterline. The inside of the hull was sanded down and 2 layers of mat applied. Then the finish on the outside was sanded, then some putty filler followed by gelcoat were put on with lots of sanding with different grits at each stage. -- ------------------------------------------------------------------------------ William R Watt National Capital FreeNet Ottawa's free community network homepage: www.ncf.ca/~ag384/top.htm warning: non-freenet email must have "notspam" in subject or it's returned |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
epoxy does so pass water | Boat Building | |||
Epoxy sales | Boat Building | |||
Epoxy or Poly resin? | Boat Building | |||
epoxy bite to wood | Boat Building | |||
Epoxy stanchions to deck?? | General |