looking at Cat 271 or suggestions?

That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:

looking at Cat 271 or suggestions?

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

So - where to buy new 271 or 277 pumps - cheapest price?

Who or where is EDI Distribution?



On Tue, 28 Oct 2003 14:23:34 -0500, Glenn Ashmore
wrote:

That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:

looking at Cat 271 or suggestions?

http://www.edidistributors.com/store/merchant.mv

But don't count on finding any miraculous deals on a stainless Cat pump
The 271 list for over $1,800 and the best price I found was about
$1,200. I spent 2 years stalking eBay and finally sniped a new one for
$400. (gloat, gloat) :-)

wrote:

So - where to buy new 271 or 277 pumps - cheapest price?

Who or where is EDI Distribution?



On Tue, 28 Oct 2003 14:23:34 -0500, Glenn Ashmore
wrote:


That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:


looking at Cat 271 or suggestions?



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

The EDI price for a 277 Ni Al Bronze was $723.


On Tue, 28 Oct 2003 16:54:08 -0500, Glenn Ashmore
wrote:

http://www.edidistributors.com/store/merchant.mv

But don't count on finding any miraculous deals on a stainless Cat pump
The 271 list for over $1,800 and the best price I found was about
$1,200. I spent 2 years stalking eBay and finally sniped a new one for
$400. (gloat, gloat) :-)

wrote:

So - where to buy new 271 or 277 pumps - cheapest price?

Who or where is EDI Distribution?



On Tue, 28 Oct 2003 14:23:34 -0500, Glenn Ashmore
wrote:


That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:


looking at Cat 271 or suggestions?