RO watermaker pressure pumps - cheapest place to buy?
 

looking at Cat 271 or suggestions?

RO watermaker pressure pumps - cheapest place to buy?
 

That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:

looking at Cat 271 or suggestions?

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

RO watermaker pressure pumps - cheapest place to buy?
 

So - where to buy new 271 or 277 pumps - cheapest price?

Who or where is EDI Distribution?



On Tue, 28 Oct 2003 14:23:34 -0500, Glenn Ashmore
wrote:

That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:

looking at Cat 271 or suggestions?

RO watermaker pressure pumps - cheapest place to buy?
 

http://www.edidistributors.com/store/merchant.mv

But don't count on finding any miraculous deals on a stainless Cat pump
The 271 list for over $1,800 and the best price I found was about
$1,200. I spent 2 years stalking eBay and finally sniped a new one for
$400. (gloat, gloat) :-)

wrote:

So - where to buy new 271 or 277 pumps - cheapest price?

Who or where is EDI Distribution?



On Tue, 28 Oct 2003 14:23:34 -0500, Glenn Ashmore
wrote:


That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:


looking at Cat 271 or suggestions?



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

RO watermaker pressure pumps - cheapest place to buy?
 

The EDI price for a 277 Ni Al Bronze was $723.


On Tue, 28 Oct 2003 16:54:08 -0500, Glenn Ashmore
wrote:

http://www.edidistributors.com/store/merchant.mv

But don't count on finding any miraculous deals on a stainless Cat pump
The 271 list for over $1,800 and the best price I found was about
$1,200. I spent 2 years stalking eBay and finally sniped a new one for
$400. (gloat, gloat) :-)

wrote:

So - where to buy new 271 or 277 pumps - cheapest price?

Who or where is EDI Distribution?



On Tue, 28 Oct 2003 14:23:34 -0500, Glenn Ashmore
wrote:


That is the best but an argument could be made for the aluminum bronze
277. It is cheaper and those totally opposed to stainless in sal****er
like them better. Also General Pump WM series is a line of stainless
1500 psi .5 to 4.5 gpm pumps that is used by a couple of makers.
Considerably cheaper than the Cat but the Cat 271 is still the ideal
pump for 400 to 800 GPD systems.

wrote:


looking at Cat 271 or suggestions?